N-PROPANOL

Propyl alcohol is used as a solvent for waxes, vegetable oils, resins, cellulose esters, ethers, paints, printing inks, cosmetics, perfumes, polishing compounds, lacquer formulations, pharmaceuticals, polymers production, and contact lenses manufacturing (ACGIH, 1991; Ashford, 1994; HSDB , 1999; Snyder, 1992).
Propyl alcohol is used as a food additive (for synthetic flavoring) in non-alcoholic beverages, ice cream, candy, and baked goods (ACGIH, 1991; Ashford, 1994; HSDB , 1999; Snyder, 1992).
Propyl alcohol is used as a antiseptic/disinfecting agent in skin care products, hair care products, dye solutions, antifreezes, brake fluids, degreasing agents, soaps, rubbing alcohols, and window cleaners (AAR, 1998; (Harbison, 1998; HSDB , 1999).
Propyl alcohol has been identified in commercial fermentation brine, Cahors wine, Corbiers wine, Jamaican Run, beer, cistern room whiskey, kefir, yogurt, and fermented eggs (Howard, 1990).

FORMS

Propyl alcohol is a colorless liquid (AAR, 1998; (Ashford, 1994). It has a sharp musty and slightly stupefying odor like rubbing alcohol (AAR, 1998; (Budavari, 1996).

SOURCES

Propyl alcohol occurs naturally in plant volatiles, forest fires, volcanos, and insects. It is released during microbial degradation of animal wastes. The various natural sources are expected to release significant amounts of propyl alcohol (Harbison, 1998; Howard, 1990).
Propyl alcohol is emitted from diesel exhaust, plastic combustion, printing, whiskey production, wood pulping, sewage treatment, fermentation, and factories that use propyl alcohol (Howard, 1990).
Propyl alcohol is manufactured by hydrogenation of propinoaldehyde following hydroformulation of ethylene, by oxidation of propane, and by hydrogenation of propylene oxide over nickel (Ashford, 1994; HSDB , 1999; Snyder, 1992). It can also be obtained from crude fuel oil by fractionation, from the synthesis of methyl alcohol by high pressure, from the oxidation process of propane/butane, and from the reaction between carbon monoxide and hydrogen as a byproduct (Budavari, 1996; HSDB , 1999). It can be isolated from head fractions during distillation of wine and tail fractions during rectification of spirits (HSDB , 1999).

-CLINICAL EFFECTS

GENERAL CLINICAL EFFECTS

Propyl alcohol may be irritating to the eyes, skin, and mucous membranes. Exposure may occur via inhalation, ingestion, and dermal and eye contact.

Signs and symptoms of exposure may include headache, lethargy, dizziness, ataxia, incoordination, confusion, CNS depression, stupor, persistent coma with hypothermia, prostration, gastroenteritis (with or without vomiting and diarrhea), hypotension, bradycardia, circulatory collapse, muscular edema, and death from respiratory arrest.

POTENTIAL HEALTH HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

May cause toxic effects if inhaled or absorbed through skin.
Inhalation or contact with material may irritate or burn skin and eyes.
Fire will produce irritating, corrosive and/or toxic gases.
Vapors may cause dizziness or suffocation.
Runoff from fire control or dilution water may cause pollution.

ACUTE CLINICAL EFFECTS

N-propanol is absorbed through the skin, lungs and GI tract. Symptoms of intoxication include mucous membrane irritation, loss of coordination, lethargy, hypotension, sleepiness, headache, weakness, dizziness, coma, and (occasionally) death (ILO, 1983; NIOSH/OSHA; (p 38). Exposure to an airborne concentration of 400 ppm for 3 to 5 minutes caused mild eye, nose, and throat irritation (Clayton & Clayton, 1982). It caused positional nystagmus in rabbits (Oedkvisi, 1979).

CHRONIC CLINICAL EFFECTS

N-propanol has produced positive skin patch test reactions in humans (HSDB), indicating potential allergic sensitization. No other adverse effects from long-term human exposure have been reported (Clayton & Clayton, 1982).

In mice, n-propanol inhalation caused no EEG changes (pp 16-22). When given to neonatal rats, it interfered with normal brain development (Grant & Samson, 1984). In rats, the highest concentration of n-propanol was in the adrenals following inhalation exposure (Babanov, 1984). Rats had cross-tolerance between ethanol and n-propanol (Leblanc & Kalant, 1975). N-propanol produced no greater liver toxicity than ethanol in rats (Hillbom, 1974), but did cause changes in internal organs and the CNS (Cameron, 1985).

-MEDICAL TREATMENT

LIFE SUPPORT

Support respiratory and cardiovascular function.

SUMMARY

FIRST AID - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Move victim to fresh air.
Call 911 or emergency medical service.
Give artificial respiration if victim is not breathing.
Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes.
In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes.
Wash skin with soap and water.
Keep victim warm and quiet.
In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin.
Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed.
Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

FIRST AID

FIRST AID

EYE EXPOSURE - Immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical.
DERMAL EXPOSURE - Flush the contaminated skin with water. Where there is evidence of skin irritation, get medical attention.
INHALATION EXPOSURE - Move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.
ORAL EXPOSURE - If this chemical has been swallowed, get medical attention immediately.
TARGET ORGANS - Eyes, skin, respiratory system, gastrointestinal tract, and central nervous system (National Institute for Occupational Safety and Health, 2007).

GENERAL -

Move victims of inhalation exposure from the toxic environment and administer 100% humidified supplemental oxygen with assisted ventilation as required. Exposed skin and eyes should be copiously flushed with water. Because of the potential for rapid onset of CNS depression or seizures with possible aspiration of gastric contents, EMESIS SHOULD NOT BE INDUCED. Cautious gastric lavage followed by administration of activated charcoal may be of benefit if the patient is seen soon after the exposure.

INHALATION EXPOSURE -

INHALATION: Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with an inhaled beta2-adrenergic agonist. Consider systemic corticosteroids in patients with significant bronchospasm.
If bronchospasm and wheezing occur, consider treatment with inhaled sympathomimetic agents.

DERMAL EXPOSURE -

DECONTAMINATION: Remove contaminated clothing and jewelry and place them in plastic bags. Wash exposed areas with soap and water for 10 to 15 minutes with gentle sponging to avoid skin breakdown. A physician may need to examine the area if irritation or pain persists (Burgess et al, 1999).
Treat dermal irritation or burns with standard topical therapy. Patients developing dermal hypersensitivity reactions may require treatment with systemic or topical corticosteroids or antihistamines.

EYE EXPOSURE -

DECONTAMINATION: Remove contact lenses and irrigate exposed eyes with copious amounts of room temperature 0.9% saline or water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist after 15 minutes of irrigation, the patient should be seen in a healthcare facility.

ORAL EXPOSURE -

Because of the potential for gastrointestinal tract irritation and CNS depression, DO NOT induce emesis.
Significant esophageal or gastrointestinal tract irritation or burns may occur following ingestion. The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation.
GASTRIC LAVAGE: Consider after ingestion of a potentially life-threatening amount of poison if it can be performed soon after ingestion (generally within 1 hour). Protect airway by placement in the head down left lateral decubitus position or by endotracheal intubation. Control any seizures first.

CONTRAINDICATIONS: Loss of airway protective reflexes or decreased level of consciousness in unintubated patients; following ingestion of corrosives; hydrocarbons (high aspiration potential); patients at risk of hemorrhage or gastrointestinal perforation; and trivial or non-toxic ingestion.

ACTIVATED CHARCOAL: Administer charcoal as a slurry (240 mL water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents, 25 to 50 g in children (1 to 12 years), and 1 g/kg in infants less than 1 year old.

-RANGE OF TOXICITY

MINIMUM LETHAL EXPOSURE

CASE REPORTS

ADULT

The lowest published lethal oral dose for a woman was 5700 mg/kg (RTECS , 1992).

ANIMAL DATA

Exposure to 13,120 ppm for 160 minutes or 19,680 ppm for 120 minutes was lethal to mice (Clayton & Clayton, 1982).

MAXIMUM TOLERATED EXPOSURE

ANIMAL DATA

Mice exposed for 480 minutes to 2050 ppm (5 mg/L) exhibited no signs of adverse effects (Clayton & Clayton, 1982).
Four successive daily doses of 2160 mg/kg/day in rats produced no macroscopic liver lesions (Clayton & Clayton, 1982).
Mice survived intermittent exposures for a total of 95 hours to 7874 ppm (19.3 mg/L) (Clayton & Clayton, 1982).

Carcinogenicity Ratings for CAS71-23-8 :

ACGIH (American Conference of Governmental Industrial Hygienists, 2010): A4 ; Listed as: N-Propanol (n-Propyl alcohol)

A4 :Not Classifiable as a Human Carcinogen: Agents which cause concern that they could be carcinogenic for humans but which cannot be assessed conclusively because of a lack of data. In vitro or animal studies do not provide indications of carcinogenicity which are sufficient to classify the agent into one of the other categories.

EPA (U.S. Environmental Protection Agency, 2011): Not Listed
IARC (International Agency for Research on Cancer (IARC), 2016; International Agency for Research on Cancer, 2015; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2010; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2010a; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2008; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2007; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2006; IARC, 2004): Not Listed
NIOSH (National Institute for Occupational Safety and Health, 2007): Not Listed ; Listed as: n-Propyl alcohol
MAK (DFG, 2002): Not Listed
NTP (U.S. Department of Health and Human Services, Public Health Service, National Toxicology Project ): Not Listed

TOXICITY AND RISK ASSESSMENT VALUES

EPA IRIS

EPA Risk Assessment Values for CAS71-23-8 (U.S. Environmental Protection Agency, 2011):

Not Listed

TOXICITY VALUES

References: Lewis, 1996 OHM/TADS, 1999 RTECS, 1999
- LC50- (INHALATION)MOUSE:
- LCLo- (INHALATION)CAT:
- LCLo- (INHALATION)RAT:
- LD50- (INTRAPERITONEAL)GUINEA_PIG:
- LD50- (INTRAPERITONEAL)HAMSTER:
- LD50- (INTRAPERITONEAL)MOUSE:
- LD50- (INTRAVENOUS)MOUSE:
- LD50- (ORAL)MOUSE:
- LD50- (SUBCUTANEOUS)MOUSE:
- LD50- (INTRAPERITONEAL)RABBIT:
- LD50- (INTRAVENOUS)RABBIT:
- LD50- (ORAL)RABBIT:
- LD50- (SKIN)RABBIT:
- LD50- (INTRAPERITONEAL)RAT:
- LD50- (INTRAVENOUS)RAT:
- LD50- (ORAL)RAT:
- LDLo- (INTRAVENOUS)CAT:
- LDLo- (SUBCUTANEOUS)CAT:
- LDLo- (ORAL)DOG:
- LDLo- (SUBCUTANEOUS)DOG:
- LDLo- (ORAL)HUMAN:
- LDLo- (SUBCUTANEOUS)RABBIT:
- TCLo- (INHALATION)RAT:
- TDLo- (SKIN)RABBIT:
- TDLo- (ORAL)RAT:
- TDLo- (SUBCUTANEOUS)RAT:

CALCULATIONS

AMBIENT CONVERSIONS

CONVERSION FACTORS

1 ppm = 2.45 mg/m(3) (at 25 degrees C, 760 mmHg) (Snyder, 1992)

1 ppm = 2.46 mg/m(3) (at 68 degrees F, 760 mmHg) (NIOSH , 1999)
1 mg/L = 408 ppm (at 25 degrees C, 760 mmHg) (Snyder, 1992)

-STANDARDS AND LABELS

WORKPLACE STANDARDS

ACGIH TLV Values for CAS71-23-8 (American Conference of Governmental Industrial Hygienists, 2010):

Editor's Note: The listed values are recommendations or guidelines developed by ACGIH(R) to assist in the control of health hazards. They should only be used, interpreted and applied by individuals trained in industrial hygiene. Before applying these values, it is imperative to read the introduction to each section in the current TLVs(R) and BEI(R) Book and become familiar with the constraints and limitations to their use. Always consult the Documentation of the TLVs(R) and BEIs(R) before applying these recommendations and guidelines.

Adopted Value

N-Propanol (n-Propyl alcohol)

TLV:

TLV-TWA: 100 ppm
TLV-STEL:
TLV-Ceiling:

Notations and Endnotes:

Carcinogenicity Category: A4
Codes: Not Listed
Definitions:

A4: Not Classifiable as a Human Carcinogen: Agents which cause concern that they could be carcinogenic for humans but which cannot be assessed conclusively because of a lack of data. In vitro or animal studies do not provide indications of carcinogenicity which are sufficient to classify the agent into one of the other categories.

TLV Basis - Critical Effect(s): Eye and URT irr
Molecular Weight: 60.09

For gases and vapors, to convert the TLV from ppm to mg/m(3):

[(TLV in ppm)(gram molecular weight of substance)]/24.45

For gases and vapors, to convert the TLV from mg/m(3) to ppm:

[(TLV in mg/m(3))(24.45)]/gram molecular weight of substance

AIHA WEEL Values for CAS71-23-8 (AIHA, 2006):

Not Listed

NIOSH REL and IDLH Values for CAS71-23-8 (National Institute for Occupational Safety and Health, 2007):

Listed as: n-Propyl alcohol
REL:

TWA: 200 ppm (500 mg/m(3))
STEL: 250 ppm (625 mg/m(3))
Ceiling:
Carcinogen Listing: (Not Listed) Not Listed
Skin Designation: [skin]

Indicates the potential for dermal absorption; skin exposure should be prevented as necessary through the use of good work practices and gloves, coveralls, goggles, and other appropriate equipment.

Note(s):

IDLH:

IDLH: 800 ppm
Note(s): Not Listed

OSHA PEL Values for CAS71-23-8 (U.S. Occupational Safety, and Health Administration (OSHA), 2010):

Listed as: n-Propyl alcohol
Table Z-1 for n-Propyl alcohol:

8-hour TWA:

ppm: 200

Parts of vapor or gas per million parts of contaminated air by volume at 25 degrees C and 760 torr.

mg/m3: 500

Milligrams of substances per cubic meter of air. When entry is in this column only, the value is exact; when listed with a ppm entry, it is approximate.

Ceiling Value:
Skin Designation: No
Notation(s): Not Listed

OSHA List of Highly Hazardous Chemicals, Toxics, and Reactives for CAS71-23-8 (U.S. Occupational Safety and Health Administration, 2010):

Not Listed

ENVIRONMENTAL STANDARDS

EPA CERCLA, Hazardous Substances and Reportable Quantities for CAS71-23-8 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA CERCLA, Hazardous Substances and Reportable Quantities, Radionuclides for CAS71-23-8 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA RCRA Hazardous Waste Number for CAS71-23-8 (U.S. Environmental Protection Agency, 2010b):

Not Listed
Editor's Note: The D, F, and K series waste numbers and Appendix VIII to Part 261 -- Hazardous Constituents were not included. Please refer to 40 CFR Part 261.

EPA SARA Title III, Extremely Hazardous Substance List for CAS71-23-8 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA SARA Title III, Community Right-to-Know for CAS71-23-8 (40 CFR 372.65, 2006; 40 CFR 372.28, 2006):

Not Listed

DOT List of Marine Pollutants for CAS71-23-8 (49 CFR 172.101 - App. B, 2005):

Not Listed

EPA TSCA Inventory for CAS71-23-8 (EPA, 2005):

Listed as: 1-Propanol

SHIPPING REGULATIONS

SURFACE

DOT -- Table of Hazardous Materials and Special Provisions for UN/NA Number 1274 (49 CFR 172.101, 2005):

Hazardous materials descriptions and proper shipping name: n-Propanol or Propyl alcohol, normal

Symbol(s): Not Listed
Hazard class or Division: 3

3: Flammable and combustible liquid. See 49 CFR section 173.120 for definitions.

Identification Number: UN1274
Packing Group: II

II: Packing Group II - indicates the degree of danger presented by the material is medium.

Label(s) required (if not excepted): 3

3: Flammable Liquid.

Special Provisions: B1, IB2, T4, TP1

B1: If the material has a flash point at or above 38 °C (100 °F) and below 93 °C (200 °F), then the bulk packaging requirements of sxn. 173.241 of this subchapter are applicable. If the material has a flash point of less than 38 °C (100 °F), then the bulk packaging requirements of sxn. 173.242 of this subchapter are applicable.
IB2: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130kPa at 55 °C (1.3 bar at 131 °F) are authorized.
T4: Minimum test pressure (bar): 2.65; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP1: The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 97/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 150
Non-bulk packaging: 202
Bulk packaging: 242

Quantity Limitations:

Passenger aircraft or railcar: 5 L
Cargo aircraft only: 60 L

Vessel Stowage Requirements:

Vessel stowage location: B

B: (i) The material may be stowed "on deck" or "under deck" on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length; and (ii) "On deck only" on passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this section is exceeded.

Vessel stowage other: Not Listed

Hazardous materials descriptions and proper shipping name: n-Propanol or Propyl alcohol, normal

Symbol(s): Not Listed
Hazard class or Division: 3

3: Flammable and combustible liquid. See 49 CFR section 173.120 for definitions.

Identification Number: UN1274
Packing Group: III

III: Packing Group III - indicates the degree of danger presented by the material is minor.

Label(s) required (if not excepted): 3

3: Flammable Liquid.

Special Provisions: B1, IB3, T2, TP1

B1: If the material has a flash point at or above 38 °C (100 °F) and below 93 °C (200 °F), then the bulk packaging requirements of sxn. 173.241 of this subchapter are applicable. If the material has a flash point of less than 38 °C (100 °F), then the bulk packaging requirements of sxn. 173.242 of this subchapter are applicable.
IB3: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130 kPa at 55 °C (1.3 bar at 131 °F) are authorized, except for UN2672 (also see Special Provision IP8 in Table 3 for UN2672).
T2: Minimum test pressure (bar): 1.5; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP1: The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 97/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 150
Non-bulk packaging: 203
Bulk packaging: 242

Quantity Limitations:

Passenger aircraft or railcar: 60 L
Cargo aircraft only: 220 L

Vessel Stowage Requirements:

Vessel stowage location: A

A: The material may be stowed "on deck" or "under deck" on a cargo vessel and on a passenger vessel.

Vessel stowage other: Not Listed

ICAO International Shipping Name for UN1274 (ICAO, 2002):

Proper Shipping Name: n-Propanol
UN Number: 1274
Proper Shipping Name: Propyl alcohol, normal
UN Number: 1274

LABELS

NFPA

NFPA Hazard Ratings for CAS71-23-8 (NFPA, 2002):

Listed as: Propyl Alcohol
Hazard Ratings:

Health Rating (Blue): 1

(1) Slightly toxic material. May cause irritation, but only minor residual injury even without treatment. Recognized innocuous materials when used with responsible care.

Flammability Rating (Red): 3

(3) Flammable. Liquids and solids that can be ignited under almost all ambient temperature conditions. Including liquids with a flash point below 73 degrees F and a boiling point above 100 degrees F, solid materials which form coarse dusts that burn rapidly without becoming explosive, materials which burn rapidly by reason of self-contained oxygen (ie, organic peroxides), and materials which ignite spontaneously when exposed to air.

Instability Rating (Yellow): 0

(0) Materials which are normally stable, even under fire conditions, and which are not reactive with water.

Oxidizer/Water-Reactive Designation: Not Listed

-HANDLING AND STORAGE

SUMMARY

INDUSTRIAL CHEMICALS

Metal containers involving the transfer of 5 gallons or more of propyl alcohol should be grounded and bonded (Sittig, 1991).

HANDLING

Broken packages should not be handled without wearing appropriate personal protective equipment (AAR, 1998).

STORAGE

CONTAINER

Containers with propyl alcohol should be kept tightly closed. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters (Sittig, 1991).

ROOM/CABINET RECOMMENDATIONS

Propyl alcohol must be stored in a cool and well-ventilated area away from heat and ignition sources (Sittig, 1991).

INCOMPATIBILITIES

Keep sparks, flames, and other source of ignition away (AAR, 1998).
Keep away form strong oxidizers (Sittig, 1991).
Attacks some plastics, rubber, and coatings (Pohanish & Greene, 1997).

-PERSONAL PROTECTION

SUMMARY

RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Wear positive pressure self-contained breathing apparatus (SCBA).
Structural firefighters' protective clothing will only provide limited protection.

Wear appropriate protective rubber glove, goggles (or face shield), overalls, all-purpose gas mask, and avoid breath vapors (AAR, 1998; (ITI, 1995). Wash away any material which may have contacted skin or eyes with copious amounts of running water or soap and water for at least 15 minutes (AAR, 1998). Change immediately when work clothing becomes contaminated due to the low flash point (flammability hazard) (NIOSH , 1999).

EYE/FACE PROTECTION

Vapors are mildly irritating to the eyes (AAR, 1998). Goggles (or face shields) should be worn for protection (AAR, 1998; (ITI, 1995).

RESPIRATORY PROTECTION

Refer to "Recommendations for respirator selection" in the NIOSH Pocket Guide to Chemical Hazards on TOMES Plus(R) for respirator information.

Vapors are mildly irritating to the nose and throat. Personnel should keep upwind from propyl alcohol (AAR, 1998). All-purpose gas mask should be worn (ITI, 1995).

PROTECTIVE CLOTHING

CHEMICAL PROTECTIVE CLOTHING. Search results for CAS 71-23-8.

All data are compiled from published sources and are NOT recommended specifically by Truven Health Analytics. The appearance of specific manufacturers or products in this section does not represent an endorsement by Truven Health Analytics. No attempt has been made to verify the data presented. All product recommendations should be confirmed with the specific manufacturer for verification of product performance.
CLOTHING

Neoprene

LaCrosse-Rainfair Safety Products

Chem Tech II splash suits

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

National Safety Wear

Nation splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natprene splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Nattuf splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe II splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe I splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe V

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe VI

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

River City

Neoprene splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (River City, 1995)

Tingley Rubber Corporation

Premier, Magnaprene

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Neoprene+Latex

Neese Industries, Inc.

Neoprene splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

Neoprene+PVC

National Safety Wear

Natchem Splash Suits

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Nitrile

LaCrosse-Rainfair Safety Products

Super nitrile splash suits

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Paracril+PVC

National Safety Wear

Natweb splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natwork splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Plastic Laminate

DuPont Personal Protection

CPF 4

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None detected
Notes: Not Listed
Citation: (DuPont, 2002)

Polyurethane

LaCrosse-Rainfair Safety Products

Cool air splash suits

Degradation Rating: Not Recommended
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

National Safety Wear

Natflex splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natsoft splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neese Industries, Inc.

Polyurethane splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

Tingley Rubber Corporation

Iron Eagle, Eagle

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Polyvinyl Chloride

LaCrosse-Rainfair Safety Products

8000 Series splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Acid Suit splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Chem King splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Chem Tech I splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Flame Tech splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Job King splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Warm Ã"N Dry splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

National Safety Wear

Natcide splash suit

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natcon splash suit

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natlite II splash suit

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natlite I splash suit

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natpro splash suit

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neese Industries, Inc.

PVC splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

River City

PVC splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (River City, 1995)

Tingley Rubber Corporation

American, Scrim, DuraScrim, PVC Polyester, Double-Ply PVC, PVC Film

Degradation Rating: Fair
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Webdri, Safetyflex, Electra, ElectraBrite

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Styrene-butadiene Rubber (SBR)

LaCrosse-Rainfair Safety Products

Vultex splash suits

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

FOOTWEAR

Natural Rubber

Tingley Rubber Corporation

Molded Overshoes, Hand-Made Footwear

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Neoprene

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

North -- Safety 4H

Neoprene series - specific style not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Servus (Norcross Safety Products)

Neoprene III

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

Tingley Rubber Corporation

Molded Overshoes, Hand-Made Footwear

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Nitrile+PVC

Onguard Industries

Heartland

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polyurethane+PVC

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Onguard Industries

Polyblend

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Superpoly

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polyurethane Blend

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Polyvinyl Chloride

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

North -- Safety 4H

PVC Series - specific style not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Servus (Norcross Safety Products)

Supreme

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

Tingley Rubber Corporation

Two Stage Injection Molded, Better Grade, General Purpose, Workbrutes

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Two Stage Injection Molded, Premier

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Rubber

North -- Safety 4H

Rubber Series - specific style not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Rubber blend

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Onguard Industries

Bluemax

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polymax

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Standard

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Servus (Norcross Safety Products)

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

GLOVES

Butyl

Best Manufacturing

Butyl 878

Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None Detected
Notes: Not Listed
Citation: (Best Manufacturing, 2004)
Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): None Detected
Notes: Tested with Limited Exposure Method (ASTM F 1383)
Citation: (Best Manufacturing, 2004)

Latex

Memphis Glove Company

5290 Series Flock-Lined Latex

Degradation Rating: 5 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): 331
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

Natural Rubber

Ansell

Conform

Degradation Rating: Excellent
Breakthrough Time (minutes): <10
Permeation Rate (mcg/cm2/min): <90
Notes: Not Listed
Citation: (Ansell-Edmont, 2001)

Best Manufacturing

Original Nitty Gritty

Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): 135
Permeation Rate (mcg/cm2/min): 11
Notes: Not Listed
Citation: (Best Manufacturing, 2004)
Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): None Detected
Notes: Tested under limited exposure method (ASTM F 1383)
Citation: (Best Manufacturing, 2004)

Boss Manufacturing Company

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Boss Manufacturing Company, 1998)

Comasec Safety, Inc

Astro-Flex

Degradation Rating: Not Listed
Breakthrough Time (minutes): 70
Permeation Rate (mcg/cm2/min): 9
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Black Max

Degradation Rating: Not Listed
Breakthrough Time (minutes): 195
Permeation Rate (mcg/cm2/min): 4.8
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Jelly Fish

Degradation Rating: Not Listed
Breakthrough Time (minutes): 70
Permeation Rate (mcg/cm2/min): 9
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Montgomery Safety Products

Natural Rubber

Degradation Rating: Excellent
Breakthrough Time (minutes): 20
Permeation Rate (mcg/cm2/min): <10
Notes: Not Listed
Citation: (Montgomery Safety Products, 1995)

Neoprene

Best Manufacturing

Chloroflex 1823

Degradation Rating: Excellent (after 30 minutes)
Breakthrough Time (minutes): 150
Permeation Rate (mcg/cm2/min): Not Recommended
Notes: Not Listed
Citation: (Best Manufacturing, 2002)

Boss Manufacturing Company

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Boss Manufacturing Company, 1998)

Comasec Safety, Inc

Astro-Prene

Degradation Rating: Not Listed
Breakthrough Time (minutes): 90
Permeation Rate (mcg/cm2/min): 6
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

MAPA Spontex, Inc.

Stanzoil/NL-34

Degradation Rating: Not Tested
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None Detected
Notes: 99.50%
Citation: (MAPA Professional, 2004)

Memphis Glove Company

5410S Series Flock-Lined Neoprene

Degradation Rating: 3 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): 85
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

6912 Neomax Neoprene

Degradation Rating: 6 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

Montgomery Safety Products

Neoprene

Degradation Rating: Excellent
Breakthrough Time (minutes): 150
Permeation Rate (mcg/cm2/min): <1.0
Notes: Not Listed
Citation: (Montgomery Safety Products, 1995)

Nitrile

Ansell

Touch N Tuff

Degradation Rating: Excellent
Breakthrough Time (minutes): 125
Permeation Rate (mcg/cm2/min): <9
Notes: Not Listed
Citation: (Ansell-Edmont, 2001)

Best Manufacturing

N-DEX 7005

Degradation Rating: Poor (after 60 minutes of testing)
Breakthrough Time (minutes): 7
Permeation Rate (mcg/cm2/min): 42
Notes: Not Listed
Citation: (Best Manufacturing, 2004)

Ultimate N-Dex 9905

Degradation Rating: Poor (after 60 minutes of testing)
Breakthrough Time (minutes): 15
Permeation Rate (mcg/cm2/min): 29
Notes: Not Listed
Citation: (Best Manufacturing, 2004)
Degradation Rating: Poor (after 60 minutes of testing)
Breakthrough Time (minutes): 48
Permeation Rate (mcg/cm2/min): 17
Notes: Tested with Limited Exposure Method (ASTM F 1383)
Citation: (Best Manufacturing, 2004)

Ultraflex Nitrile 22R

Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None Detected
Notes: Not Listed
Citation: (Best Manufacturing, 2004)
Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): None Detected
Notes: Tested through limited exposure method (ATSM F 1383)
Citation: (Best Manufacturing, 2004)

Boss Manufacturing Company

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Boss Manufacturing Company, 1998)

Marigold Industrial

315F

Degradation Rating: Good
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

326Y

Degradation Rating: Excellent
Breakthrough Time (minutes): 8
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

368R

Degradation Rating: Good
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): 0
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

Degradation Rating: Excellent
Breakthrough Time (minutes): 45
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

CO7B

Degradation Rating: Not Listed
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

CR30

Degradation Rating: Not Listed
Breakthrough Time (minutes): 68
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

G12T

Degradation Rating: Excellent
Breakthrough Time (minutes): 8
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

ME104

Degradation Rating: Excellent
Breakthrough Time (minutes): 43
Permeation Rate (mcg/cm2/min): 0
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

U263B/G

Degradation Rating: Good
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

US:173 / CAN:459

Degradation Rating: Excellent
Breakthrough Time (minutes): 20
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

US:414 / CAN:454

Degradation Rating: Poor
Breakthrough Time (minutes): 7
Permeation Rate (mcg/cm2/min): <100
Notes: Not Listed
Citation: (Marigold Industrial, 2003)

Memphis Glove Company

5320 Series Flock-Lined Nitrile

Degradation Rating: 6 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

9750 Series Predator Nitrile

Degradation Rating: 6 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

Montgomery Safety Products

M-Tech

Degradation Rating: Excellent
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (Montgomery Safety Products, 1995)

North Safety Products

Nitrile Series

Degradation Rating: Good
Breakthrough Time (minutes): 264
Permeation Rate (mcg/cm2/min): 1100
Notes: Not Listed
Citation: (North, 2002)

Plastic Laminate

North -- Safety 4H

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): Not reported
Notes: tested at 21 degrees C; 70 degrees F
Citation: (Safety 4, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): Not reported
Notes: tested at 35 degrees C; 95 degrees F
Citation: (Safety 4, 2002)

Polyvinyl Chloride

Ansell

Dura-Touch

Degradation Rating: Good
Breakthrough Time (minutes): <10
Permeation Rate (mcg/cm2/min): <900
Notes: Not Listed
Citation: (Ansell-Edmont, 2001)

Boss Manufacturing Company

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Boss Manufacturing Company, 1998)

Comasec Safety, Inc

Blockbuster LP

Degradation Rating: Not Listed
Breakthrough Time (minutes): 130
Permeation Rate (mcg/cm2/min): 12
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Lion Paw

Degradation Rating: Not Listed
Breakthrough Time (minutes): 130
Permeation Rate (mcg/cm2/min): 12
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Presti

Degradation Rating: Not Listed
Breakthrough Time (minutes): 130
Permeation Rate (mcg/cm2/min): 12
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Yellow Jacket

Degradation Rating: Not Listed
Breakthrough Time (minutes): 130
Permeation Rate (mcg/cm2/min): 12
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Yellow Submarine

Degradation Rating: Not Listed
Breakthrough Time (minutes): 130
Permeation Rate (mcg/cm2/min): 12
Notes: Not Listed
Citation: (Comasec Safety, Inc., 2003a)

Memphis Glove Company

6400 Actifresh Green PVC

Degradation Rating: 3 (on a scale of 0 to 6, with 0 offering the least chemical resistance)
Breakthrough Time (minutes): 82
Permeation Rate (mcg/cm2/min): Not Reported
Notes: Not Listed
Citation: (Memphis Glove Company, 2001)

Polyvinyl Chloride/Nitrile

Comasec Safety, Inc

Multi+plus

Degradation Rating: Not Listed
Breakthrough Time (minutes): 240
Permeation Rate (mcg/cm2/min): 0
Notes: tested in accordance with ASTM F739
Citation: (Comasec Safety, Inc., 2003a)

Viton over Butyl

Best Manufacturing

Viton #890

Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None Detected
Notes: Not Listed
Citation: (Best Manufacturing, 2004)
Degradation Rating: Excellent (after 60 minutes of testing)
Breakthrough Time (minutes): >240
Permeation Rate (mcg/cm2/min): None Detected
Notes: Tested with limited exposure method (ASTM F 1383)
Citation: (Best Manufacturing, 2004)

GENERAL INFORMATION

This section provides a compilation of chemical resistance information and test data for specific protective clothing products. Chemical resistance information includes both degradation resistance ratings and permeation resistance data. This information is designed to assist in the selection of appropriate protective clothing. Only data on specific products and manufacturers are included. Generic information or recommendations are not provided since significant differences can exist in the chemical resistance for apparent similar product types.
Specific product information is organized by general product type (gloves, garments, and footwear), material type, and manufacturer. The category 'garments' may include totally encapsulating suits, splash suits, as well as other items (e.g., coveralls, jackets, and aprons). Specific manufacturers should be contacted to determine the features of available styles/models.
In addition to chemical resistance information, there are many critical variables in the selection of protective clothing which cannot be represented in this summary of the literature. Some factors to be considered in choosing protective clothing include, but are not limited to: overall clothing integrity, physical hazard resistance, durability, human factors, ease of decontamination, and cost. Overall clothing integrity refers to a specific design's ability to offer consistent protection for all clothing-covered areas of the body. Physical hazards include resisting the effects of abrasion, cuts, tears, and punctures. Human factors entail effects on wearer mobility, visibility, and hearing for garments; dexterity, tactility, and grip for gloves; ankle support and weight for footwear; and, any effect of the clothing on the function of the wearer. There are several variations in the design for gloves, garments, and footwear that affect these factors. Protective clothing must properly be sized and correctly fit the wearer to ensure its proper use and function.
As required in the U.S.A., protective clothing should be selected based on a risk assessment of the workplace. This risk assessment must account for the identification of existing as well as potential hazards and involve the recommendation of protective clothing appropriate for the identified hazards. Therefore, the recommendations in this section should not be used as the sole basis for decisions on choice of protective clothing, but rather should be used as a tool by qualified occupational health and safety professionals or other technically qualified persons in conjunction with a review of all mitigating factors. Consult the OSHA PPE Standard (29 CFR 1910.132 - 1910.138) for regulations and additional guidance regarding the selection and use of protective clothing and equipment. For general information on protective clothing selection, refer to the "PERSONAL PROTECTIVE EQUIPMENT - OSHA PUB 3077" document.
PROTECTIVE CLOTHING SELECTION

Determine the type of protective clothing item needed based on a risk assessment (e.g., gloves, garments, footwear).
For high risk situations, choose clothing that covers all parts of the body that may be exposed. In many cases, multiple clothing items will be required. Low risk situations may permit partial body protective clothing. Select protective clothing products that have reported chemical resistance data. High risk situations involving full body clothing or extended chemical contact often require permeation resistance data to determine the barrier effectiveness of materials used in the construction of clothing. Relatively low risk situations, where only splash or incidental exposure occur, may allow use of protective clothing based on degradation or penetration resistance data. Specifics on the interpretation of chemical resistance data are presented below.
Other factors must be considered in addition to chemical resistance. The selected chemical protective clothing item should offer the optimal combination of protection against identified hazards while allowing maximum function and comfort.

INTERPRETATION OF DEGRADATION RATINGS

Degradation refers to physical changes in a material as the result of chemical exposure. Degradation may become evident in visible changes, such as discoloration, swelling, delamination, deterioration, or disintegration. Degradation effects may also be measured by weight change or other changes in a material's physical properties (e.g., strength, elasticity, hardness).
Degradation resistance ratings are provided by manufacturers to rate the amount of degradation that occurs for a particular protective clothing material when contacted by a chemical. All degradation ratings are qualitative and include ratings, such as "EXCELLENT," "GOOD," "FAIR," "POOR," and "NOT RECOMMENDED." There is no standard test method for the measurement of chemical degradation resistance; therefore, manufacturer ratings may be based on different testing approaches. This makes comparison of degradation ratings between manufacturers unreliable.
The use of degradation resistance ratings alone to recommend protective clothing, particularly for high hazard situations, should be avoided. Degradation resistance testing does not directly assess the barrier quality of protective clothing, since materials can show relatively little degradation but still allow either permeation or penetration by a chemical. Degradation resistance ratings can be used to exclude protective clothing materials from consideration. Protective clothing materials with a "NOT RECOMMENDED" degradation resistance rating should never be used.
For some products, the rating "NO PENETRATION" is provided. This refers to penetration resistance test results that are based on a different procedure (American Society for Testing and Materials (ASTM) Standard Test Method F 903). Penetration resistance testing involves placing a material sample in a test cell, exposing the exterior side of the material to a chemical, and then observing the interior side of the material for visible signs of liquid penetration. Part of the test is conducted at an elevated pressure. Test results are reported as pass (no penetration) or fail (penetration detected). Unlike degradation testing, penetration testing provides an assessment of protective clothing material barrier performance. Since penetration resistance testing examines only observable amounts of liquid penetration, permeation may still occur. The use of penetration resistance data must be restricted to liquid chemicals, and should be limited to scenarios where there is no reasonable vapor exposure hazard under the conditions of exposure.

INTERPRETATION OF PERMEATION DATA

Permeation is the process of chemical movement through a material on a molecular level. Permeation resistance refers to the ability of a material to retard or prevent chemical movement through it. Permeation may occur without any visible signs of degradation.
Permeation resistance is measured using a test cell which is divided into two halves by a protective clothing specimen. Chemical is placed on the challenge side, while the collection side is periodically monitored for permeating chemical. Permeation data were obtained in accordance with the American Society for Testing and Materials (ASTM) Standard Test Method F 739 (Resistance of Materials Used in Protective Clothing to Permeation by Liquids and Gases), unless stated otherwise. In the case of chemicals that are classified as warfare agents, the data were obtained in accordance with the Military Standard 282 (MIL-STD-282) (Military Standard, Filter Units, Protective Clothing, Gas-Mask Components, and Related Products: Performance Test Methods).
Permeation rate is the amount of chemical that passes through a material for a measured surface area per unit time. In this section, permeation rate is expressed in micrograms per square centimeter per minute (mcg/cm(2)/min). The reported permeation rate is either the steady-state rate or the maximum rate observed during testing. In some cases, very large permeation rates exceed measurement techniques and are reported as ">" (greater than) or "HIGH."
Breakthrough time is the elapsed time, in minutes, from the time the chemical comes in contact with the material exterior surface, to the time that chemical is detected on the interior surface. When no breakthrough is detected, the breakthrough time is report as ">" the testing period. If permeation breakthrough is rapid, results are reported as "<" (less than) the earlier sampling time or as "IMMEDIATELY" (which usually means breakthrough in less than 4 minutes).
The breakthrough time should exceed the expected use period of the selected protective clothing. Additionally, there are several other factors that must be taken into account to provide appropriate protection.
Permeation testing is usually conducted with full strength, undiluted chemical for the duration of the test period. Actual exposures may involve diluted chemical for short or intermittent exposure periods.
Permeation testing is usually conducted at room temperature. Permeation occurs faster at elevated temperatures (short breakthrough times and higher permeation rates) and slower at reduced temperatures (long breakthrough times and lower permeation rates).
Permeation resistance of mixtures cannot usually be determined on the basis of the individual chemicals making up the mixture. Synergistic effects may occur and result in more rapid permeation than accounted for by the individual mixture chemicals.
Permeation rates may be used to calculate potential wearer exposure; however, several assumptions must be made about the extent of exposure and condition of clothing wear. Furthermore, there are few chemicals with dermal exposure limits, making it difficult to determine an acceptable skin exposure level.

COMPANY INFORMATION

Ansell 200 Schulz Drive Red Bank, NJ 07701 USA Phone: (732) 345-5400 Fax: (800) 800-0445 Toll-Free: (800) 800-0444 Website: http://www.ansellpro.com Email: info@ansell.com
Best Manufacturing 579 Edison Street Menlo, GA 30731 USA Phone: (706) 862-2302 Fax: (706) 862-6000 Toll-Free: (800) 241-0323 Website: http://www.bestglove.com Email: USA@bestglove.com
Boss Manufacturing Company 221 W. First Street Kewanee, IL 61443 USA Phone: (309) 852-2131 Fax: (309) 852-0848 Toll-Free: (800) 447-4581 Website: http://www.bossgloves.com Email: custserv@bossgloves.com
Comasec Safety, Inc 8 Niblick Road Box 1219 Enfield, CT 06083-1219 USA Phone: (860) 741-2207 Fax: (860) 741-0881 Toll-Free: (800) 333-0219 Website: http://www.comasecsafety.com Email: info@comasecsafety.com
DuPont Personal Protection P. O. Box 80705 Wilmington, DE 19880-0705 USA Phone: (302) 774-1000 Toll-Free: (800) 931-3456 Website: http://personalprotection.dupont.com Email: personalprotection@usa.dupont.com
LaCrosse-Rainfair Safety Products 18550 NE Riverside Parkway Portland, OR 97230 USA Phone: (800) 557-7246 Fax: (800) 558-0188 Toll-Free: (800) 557-7246 Website: http://www.lacrosserainfair.com Email: info@lacrossesafety.com
MAPA Spontex, Inc. 100 Spontex Dr. Columbia, TN 38401 USA Phone: (800) 537--2897 Fax: (800) 537--3299 Website: http://www.mapaglove.com Email: sales@mapaglove.com
Marigold Industrial 3585 Engineering Drive Suite 200 Box 926090 Norcross, GA 30092 USA Phone: (800) 733-0987 Fax: (800) 786-4564 Toll-Free: (800) 733-0987 Website: http://www.marigoldindustrial.com
Memphis Glove Company 5321 East Shelby Dr. Memphis, TN 38188 USA Phone: (901) 795-0672 Fax: (901) 794-7622 Toll-Free: (800) 955-6887 Website: http://www.memphisglove.com
Montgomery Safety Products 1117 Marion Avenue, SW Canton, OH 44707 USA Phone: (800) 562-0600 Toll-Free: (800) 562-0600 Website: http://www.montgomerysafety.com Email: gloves@montgomerysafety.com
National Safety Wear 9 High Street Miora, NY 12957 USA Phone: (800) 833-7270 Fax: (518) 529-7401 Toll-Free: (800) 833-7270 Website: http://www.natwear.com Email: sales@natwear.com
Neese Industries, Inc. 10646 Airline Hwy Gonzales, LA 70737 USA Phone: (225) 647-6553 Fax: (225) 644-3517 Toll-Free: (800) 535-8042 Website: http://www.neeseind.com Email: customerservice@neeseind.com
North -- Safety 4H 2000 Plainfield Pike Cranston, RI 02921 USA Phone: (800) 430-4110 Fax: (800) 572-6346 Toll-Free: (800) 430-4110 Website: http://www.safety4.com
North Safety Products 2000 Plainfield Pike Cranston, RI 02921 USA Phone: (800) 430-4110 Fax: (800) 572-6346 Toll-Free: (800) 430-4110 Website: http://www.northsafety.com Email: marketing@northsafety.com
Onguard Industries 1850 Clark Road Havre de Grace, MD 21078 USA Phone: (410) 272-2000 Fax: (800) 304-2282 Toll-Free: (800) 365-2282 Website: http://www.onguardindustries.com Email: support@onguardindustries.com
River City 5321 East Shelby Dr. Memphis, TN 38188 USA Phone: (800) 888-0347 Fax: (901) 795-3815 Toll-Free: (800) 888-0347 Website: http://www.protectivewear.com Email: support@protectivewear.com
Servus (Norcross Safety Products) 1136 Second St Rock Island, IL 61202 USA Phone: (800) 777-9021 Fax: (800) 267-6809 Toll-Free: (800) 777-9021 Website: http://www.servusproducts.com Email: info@nspusa.com
Tingley Rubber Corporation One Cragwood Road PO Box 100 South Plainfield, NJ 07080 USA Phone: (800) 631-5498 Fax: (866) 757-9239 Toll-Free: (800) 631-5498 Website: http://www.tingleyrubber.com

REFERENCES

CHEMICAL PROTECTIVE CLOTHING CITATIONS

The following sources were consulted for chemical protective clothing data:

(Ansell-Edmont, 2001)
(Bata Shoe Company, 1995)
(Best Manufacturing, 2002)
(Best Manufacturing, 2004)
(Boss Manufacturing Company, 1998)
(ChemFab Corporation, 1993)
(Comasec Safety, Inc., 2003)
(Comasec Safety, Inc., 2003a)
(DuPont, 2002)
(DuPont, 2002)
(DuPont, 2003)
(Guardian Manufacturing Group, 2001)
(ILC Dover, Inc., 1998)
(Kappler Inc., 2001)
(Kimberly-Clark, 2002)
(LaCrosse-Rainfair, 1997)
(MAPA Professional, 2003)
(MAPA Professional, 2004)
(Mar-Mac Manufacturing, Inc, 1995)
(Marigold Industrial, 2003)
(Memphis Glove Company, 2001)
(Montgomery Safety Products, 1995)
(Nat-Wear, 2001)
(Neese Industries, Inc., 2003)
(North, 2002)
(North, 2002)
(Playtex, 1995)
(River City, 1995)
(Safety 4, 2002)
(Servus, 1995)
(Standard Safety Equipment, 1995)
(Tingley, 2002)
(Trelleborg-Viking, Inc., 2001)
(Trelleborg-Viking, Inc., 2002)
(Wells Lamont Industrial, 2002)
(Workrite, 1997)

-PHYSICAL HAZARDS

FIRE HAZARD

SUMMARY

POTENTIAL FIRE OR EXPLOSION HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)
- HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
- Vapors may form explosive mixtures with air.
- Vapors may travel to source of ignition and flash back.
- Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks).
- Vapor explosion hazard indoors, outdoors or in sewers.
- Those substances designated with a "P" may polymerize explosively when heated or involved in a fire.
- Runoff to sewer may create fire or explosion hazard.
- Containers may explode when heated.
- Many liquids are lighter than water.
Propyl alcohol is flammable (Harbison, 1998). It can be easily ignited by heat, sparks, or flames. Attempts to extinguish fire should not be made unless flow can be stopped. Dikes should be built to contain flow as necessary. Water spray can be used to disperse vapors; water can be used to dilute standing pools of liquid (AAR, 1998). It can ignite on contact with potassium-tert-butoxide (Lewis, 1996). Vapors may travel to source of ignition and flash back (CHRIS , 1999). Toxic gases and fumes may be released in a fire (HSDB , 1999; Lewis, 1996). It has an electrical hazard rating of Class I Group D (CHRIS , 1999).

FLAMMABILITY CLASSIFICATION

NFPA Flammability Rating for CAS71-23-8 (NFPA, 2002):

Listed as: Propyl Alcohol
Flammability Rating: 3

(3) Flammable. Liquids and solids that can be ignited under almost all ambient temperature conditions. Including liquids with a flash point below 73 degrees F and a boiling point above 100 degrees F, solid materials which form coarse dusts that burn rapidly without becoming explosive, materials which burn rapidly by reason of self-contained oxygen (ie, organic peroxides), and materials which ignite spontaneously when exposed to air.

FIRE CONTROL/EXTINGUISHING AGENTS

FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient.

SMALL FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Dry chemical, CO2, water spray or alcohol-resistant foam.
Do not use dry chemical extinguishers to control fires involving nitromethane or nitroethane.

LARGE FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Water spray, fog or alcohol-resistant foam.
Do not use straight streams.
Move containers from fire area if you can do it without risk.

TANK OR CAR/TRAILER LOAD FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Fight fire from maximum distance or use unmanned hose holders or monitor nozzles.
Cool containers with flooding quantities of water until well after fire is out.
Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.
ALWAYS stay away from tanks engulfed in fire.
For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn.

NFPA Extinguishing Methods for CAS71-23-8 (NFPA, 2002):

Listed as: Propyl Alcohol
Extinguishing Method(s): 1, 5

1: "Water may be ineffective" applies to a situation where materials with a flash point below 100 degrees F (37.8 degrees C) are burning. Water will only be effective if used by experienced fire fighters under favorable conditions. Even though water may not put the fire out, it can be used to protect equipment and structures.
5: Flammable liquid fires can be extinguished using carbon dioxide, dry chemical, foam, and vaporizing liquid extinguishers, as long as the fires are small to moderate in size and the flammable liquid reservoir is shallow. Use of foam to form a blanket over a flammable liquid is not effective when the liquid is water-soluble. Certain alcohol resistant foams are effective extinguishing agents for polar, non-polar, and water-soluble liquid fires. These foams are preferred for fighting flammable liquid fires except those that involve water reactive flammable liquids.

Use alcohol-resistant foam, dry chemical, or carbon dioxide extinguish agents (solid streams of water may be ineffective). Do not extinguish fire unless flow can be stopped. Build dikes to contain flow as necessary. Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible (AAR, 1998; (Lewis, 1996).

COMBUSTION TOXICITY

Toxic gases and vapors (such as carbon monoxide) may be released in a fire (HSDB , 1999)

EXPLOSION HAZARD

Propyl alcohol can react with strong oxidizers to form an explosive mixture (Harbison, 1998).

Vapors can be explosive when exposed to heat or flame (CHRIS , 1999; HSDB , 1999; Lewis, 1996).

DUST/VAPOR HAZARD

Propyl alcohol emits acrid smoke and irritating fumes when heated to decomposition (Lewis, 1996).

Toxic gases and vapors (such as carbon monoxide) may be released in a fire (HSDB , 1999).

Propyl alcohol vapors are heavier than, and mix well with, air (AAR, 1998; (ILO, 1998). Vapors can be explosive when exposed to heat or flame (CHRIS , 1999; Lewis, 1996). Vapors may form explosive mixtures with air creating hazards indoors, outdoors, or in sewers. Vapors may travel to source of ignition and flash back (CHRIS , 1999).

REACTIVITY HAZARD

It reacts with strong oxidants such as perchlorates and nitrates (ILO, 1998). Reacts also with strong acids, caustics, aliphatic amines, and isocyanates (NIOSH , 1999) Pohanish & Greene, 1997).

Attacks some plastics, rubber, and coatings (NIOSH , 1999) Pohanish & Greene, 1997).

Propyl alcohol is classified with a reactivity group value of 20 (CHRIS , 1999).

Contact of solid potassium tert-butoxide with drops of liquid propyl alcohol can cause ignition after 1 minute (Urben, 1995).

EVACUATION PROCEDURES

SUMMARY

Editor's Note: This material is not listed in the Table of Initial Isolation and Protective Action Distances.

LARGE SPILL - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

Consider initial downwind evacuation for at least 300 meters (1000 feet).

FIRE - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

PUBLIC SAFETY MEASURES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)

CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number:

MEXICO:

SETIQ:

01-800-00-214-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5559-1588;
For calls originating elsewhere, call: 011-52-555-559-1588.

CENACOM:

01-800-00-413-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5550-1496, 5550-1552, 5550-1485, or 5550-4885;
For calls originating elsewhere, call: 011-52-555-550-1496, or 011-52-555-550-1552; 011-52-555-550-1485, or 011-52-555-550-4885.

ARGENTINA:

CIQUIME:

0-800-222-2933 in the Republic of Argentina;
For calls originating elsewhere, call: +54-11-4613-1100.

BRAZIL:

PRÓ-QUÍMICA:

0-800-118270 (Toll-free in Brazil);
For calls originating elsewhere, call: +55-11-232-1144 (Collect calls are accepted).

COLUMBIA:

CISPROQUIM:

01-800-091-6012 in Colombia;
For calls originating in Bogotá, Colombia, call: 288-6012;
For calls originating elsewhere, call: 011-57-1-288-6012.

CANADA:

CANUTEC:

613-996-6666 (Collect calls are accepted);
*666 cellular (in Canada only).

UNITED STATES:

CHEMTREC®:

1-800-424-9300 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
703-527-3887 for calls originating elsewhere (Collect calls are accepted).

CHEM-TEL, INC.:

1-800-255-3924 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
813-248-0585 for calls originating elsewhere (Collect calls are accepted).

INFOTRAC:

1-800-535-5053 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
352-323-3500 for calls originating elsewhere (Collect calls are accepted).

3E COMPANY:

1-800-451-8346 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
760-602-8703 for calls originating elsewhere (Collect calls are accepted).

NATIONAL RESPONSE CENTER (NRC):

1-800-424-8802 - (24 hours) (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
202-267-2675 for calls in the District of Columbia.

MILITARY SHIPMENTS:

703-697-0218 - Explosives/ammunition incidents (Collect calls are accepted);
1-800-851-8061 - All other dangerous goods incidents.

NATIONWIDE POISON CONTROL CENTER (United States only):

1-800-222-1222 (Toll-free in the U.S.).

For additional details see the section entitled "WHO TO CALL FOR ASSISTANCE" under the ERG Instructions.
As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions.
Keep unauthorized personnel away.
Stay upwind.
Keep out of low areas.
Ventilate closed spaces before entering.

AIHA ERPG Values for CAS71-23-8 (AIHA, 2006):

Not Listed

DOE TEEL Values for CAS71-23-8 (U.S. Department of Energy, Office of Emergency Management, 2010):

Listed as Propyl alcohol, n-
TEEL-0 (units = ppm): 200
TEEL-1 (units = ppm): 250
TEEL-2 (units = ppm): 250
TEEL-3 (units = ppm): 800
Definitions:

TEEL-0: The threshold concentration below which most people will experience no adverse health effects.
TEEL-1: The airborne concentration (expressed as ppm [parts per million] or mg/m(3) [milligrams per cubic meter]) of a substance above which it is predicted that the general population, including susceptible individuals, could experience notable discomfort, irritation, or certain asymptomatic, nonsensory effects. However, these effects are not disabling and are transient and reversible upon cessation of exposure.
TEEL-2: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience irreversible or other serious, long-lasting, adverse health effects or an impaired ability to escape.
TEEL-3: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience life-threatening adverse health effects or death.

AEGL Values for CAS71-23-8 (National Research Council, 2010; National Research Council, 2009; National Research Council, 2008; National Research Council, 2007; NRC, 2001; NRC, 2002; NRC, 2003; NRC, 2004; NRC, 2004; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; United States Environmental Protection Agency Office of Pollution Prevention and Toxics, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; 62 FR 58840, 1997; 65 FR 14186, 2000; 65 FR 39264, 2000; 65 FR 77866, 2000; 66 FR 21940, 2001; 67 FR 7164, 2002; 68 FR 42710, 2003; 69 FR 54144, 2004):

Not Listed

NIOSH IDLH Values for CAS71-23-8 (National Institute for Occupational Safety and Health, 2007):

IDLH: 800 ppm
Note(s): Not Listed

CONTAINMENT/WASTE TREATMENT OPTIONS

SUMMARY

SPILL OR LEAK PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)
- ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
- All equipment used when handling the product must be grounded.
- Do not touch or walk through spilled material.
- Stop leak if you can do it without risk.
- Prevent entry into waterways, sewers, basements or confined areas.
- A vapor suppressing foam may be used to reduce vapors.
- Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
- Use clean non-sparking tools to collect absorbed material.
RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)
- Wear positive pressure self-contained breathing apparatus (SCBA).
- Structural firefighters' protective clothing will only provide limited protection.
Keep sparks, flames, flares, and other sources of ignition away. Keep material out of water sources, sewers, and low areas. Absorb or cover with dry soil, sand, or other non-combustible material. Stop leak if safe to do so. Use water to dilute standing pools of liquid. Use water spray or vapor suppressing foam to disperse vapors (AAR, 1998; (CHRIS , 1999).

LARGE LEAK/SPILL

LARGE SPILL PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 129 (ERG, 2004)
- Dike far ahead of liquid spill for later disposal.
- Water spray may reduce vapor; but may not prevent ignition in closed spaces.
Build dikes to contain flow as necessary (AAR, 1998).

WASTE TREATMENT OPTIONS

PHYSICAL TREATMENT

Incineration is recommended for disposal (Sittig, 1991). This can be done by spraying into a furnace. Incineration can be aided by mixing with a more flammable solvent (ITI, 1995).
Waste management activities associated with material disposition are unique to individual situations. Proper waste characterization and decisions regarding waste management should be coordinated with the appropriate local, state, or federal authorities to ensure compliance with all applicable rules and regulations.

-ENVIRONMENTAL HAZARD MANAGEMENT

POLLUTION HAZARD

Propyl alcohol is dangerous to aquatic life in high concentrations, and it may be dangerous if it enters water intakes (CHRIS , 1999).

ENVIRONMENTAL FATE AND KINETICS

Propyl alcohol released into air is apt to photodegrade (with estimated half-life of 6.7 days) primarily by reaction with hydroxyl radicals. Rainout may be a significant process based on water solubility. The estimated half-life for propyl alcohol in the atmosphere is 2.6 days based on a rate constant of 3.8x10(-12) cm(3)/mol-sec for the reaction with hydroxyl radicals and an estimated hydroxyl radical concentration of 8x10(5) molecules/cm(3) (Howard, 1990).

WATER

SURFACE WATER
- Because alcohols are resistant to hydrolysis, reaction with hydroxyl radicals will not likely to be a significant process in aquatic media. Propyl alcohol released into surface waterways is apt to volatilize (with estimated half-life of 6.5 days) and biodegrade. It is not expected to adsorb to sediment. The release into ground water has unknown fate but is likely to biodegrade (Howard, 1990).

SOIL

TERRESTRIAL
- Propyl alcohol released into soil is apt to volatilize, leach into ground water, and biodegrade. Propyl alcohol released into ground water has unknown fate but is likely to biodegrade. The estimated half-life for evaporation of propyl alcohol from water 1 meter deep with a 1 m/sec current and 3 m/sec wind is 4.3 days. The adsorption to soil will be low due to the low octanol/water partition coefficient (Howard, 1990).

ABIOTIC DEGRADATION

Propyl alcohol is very volatile. Once in air, it degrades by reaction with hydroxyl radicals (Howard, 1990; HSDB , 1999).

BIODEGRADATION

Propyl alcohol is readily degraded in laboratory tests using activated sludges, sewage seed, and wastewater inocula; it is also degraded in soil and anaerobic environment (Howard, 1990).

BIOACCUMULATION

HUMANS

Human exposure will be in occupational settings and by ingestion of contaminated drinking water/foods (Howard, 1990). Propyl alcohol is more toxic to humans than ethanol, probably because it is absorbed more rapidly and metabolized slower than ethanol (Harbison, 1998; Snyder, 1992). Once absorbed, propyl alcohol is converted to proponaldehylde by alcohol dehydrogenase. No chronic effects have been reported in humans, perhaps because propyl alcohol is oxidized to propionic acid and excreted (Harbison, 1998) Hathaway, 1996).

FISH

Propyl alcohol is not expected to bioconcentrate in fish (Howard, 1990).

ENVIRONMENTAL TOXICITY

Propyl alcohol is dangerous to aquatic life in high concentrations, and it may be dangerous if it enters water intakes (CHRIS , 1999). The biological oxygen demand is rated as 0.47 lb/lb to 1.5 lb/lb for 5 days (CHRIS , 1999).

AQUATIC TOXICITY

Freshwater toxicity (OHM/TADS , 1999)

EC50 - FATHEAD MINNOWS, 29 days old: 4.63 g/L for 96H -- water hardness 47.0 mg/L of CaCO3, temperature 26.7 degrees C, pH 7.45, dissolved oxygen 4.5 mg/L, alkalinity 43.3 mg/L of CaCO3, tank volume 1 L, additions 36 volumes per day in flow-through bioassay (HSDB, 1999)
LC50 - FATHEAD MINNOWS, 30 days old: 4.48 g/L for 96H -- water hardness 47.0 mg/L of CaCO3, temperature 27.7 degrees C, pH 7.40, dissolved oxygen 5.4 mg/L, alkalinity 43.0 mg/L of CaCO3, tank volume 1.0 L, additons 36 volumes per day in flow-through bioassay (HSDB, 1999)
LC50 - MEXICAN AXOLOTL, 3-4 weeks after hatching: 4000 mg/L for 48H (HSDB, 1999)
LC50 - CLAWED TOADS, 3-4 weeks after hatching: 4000 mg/L for 48H (HSDB, 1999)
LD - CREEK CHUB: 500 mg/L for 24H -- in Detroit river water (HSDB, 1999)
LD - GUDGEON: 200 ppm for 24H
LD - FISH: 500 ppm for 24H
LD - CREEK CHUB: 350-500 ppm for 24H
LD - GOLDFISH: 500 ppm for 24H

Saltwater toxicity (OHM/TADS , 1999)

TLM - BRINE SHRIMP: 4200 ppm for 24H

PLANT TOXICITY

AQUATIC PLANTS - 11,200 ppm

-PHYSICAL/CHEMICAL PROPERTIES

MOLECULAR WEIGHT

60.10

DESCRIPTION/PHYSICAL STATE

Propyl alcohol is a clear, colorless, volatile liquid which has been described as having both a ripe fruity flavor and a burning taste (Budavari, 1989; (HSDB , 1992).

It has an ethanol like odor (Budavari, 1989)

VAPOR PRESSURE

10 mmHg (at 14.7 degrees C) (Lewis, 1996; OHM/TADS , 1999)

15 mmHg (at 20 degrees C) (ACGIH, 1991)

20.8 mmHg (at 25 degrees C) (ILO, 1998; Snyder, 1992)

20.99 mmHg (at 25 degrees C) (Howard, 1990)

21 mm Hg (at 25 degrees C) (Clayton & Clayton, 1994)

SPECIFIC GRAVITY

NORMAL TEMPERATURE AND PRESSURE

(25 degrees C; 77 degrees F and 760 mmHg)
0.8016 (at 25/4 degrees C) (Budavari, 1996)

OTHER TEMPERATURE AND/OR PRESSURE

0.8053 (at 20/4 degrees C) (Ashford, 1991; (Budavari, 1996; ILO, 1998; Snyder, 1992)
0.804 (at 20/4 degrees C) (Lewis, 1997)
0.8044 (at 20/4 degrees C) (Lewis, 1996)

TEMPERATURE AND/OR PRESSURE NOT LISTED

VAPOR (GAS): 2.1 (CHRIS , 1999)

DENSITY

OTHER TEMPERATURE AND/OR PRESSURE

0.803 kg/L (at 20 degrees C) (CHRIS , 1999)
6.7 lb/gal (at 20 degrees C) (HSDB , 1999)

TEMPERATURE AND/OR PRESSURE NOT LISTED

6.5 lbs/gal (AAR, 1998)

VAPOR DENSITY

2.1 (Harbison, 1998; ILO, 1998)
2.07 (ITI, 1995; Lewis, 1996; OHM/TADS , 1999)

FREEZING/MELTING POINT

FREEZING POINT

-126 degrees C (Ashford, 1994)
-196 degrees F (NIOSH , 1999)
-126.2 degrees C; -195.2 degrees F; 147 degrees K (CHRIS , 1999; Clayton & Clayton, 1994)

MELTING POINT

-127 degrees C (ACGIH, 1991; Budavari, 1996; OHM/TADS , 1999)
-126.5 degrees C (Howard, 1990; Snyder, 1992)

BOILING POINT

82.5 degrees C (Snyder, 1992)

97 degrees C (Ashford, 1994; Clayton & Clayton, 1994; OHM/TADS , 1999)

97.2 degrees C; 207 degrees F; 370.4 degrees K (ACGIH, 1991; Budavari, 1996; CHRIS , 1999; Howard, 1990)

FLASH POINT

15 degrees C (closed cup) (ACGIH, 1991)

23 degrees C (closed cup) (Ashford, 1994; HSDB , 1999; ILO, 1998)

59 degrees F (closed cup) (Lewis, 1996)

74 degrees F (closed cup) (HSDB , 1999)

77 degrees F (closed cup) (CHRIS , 1999)

22 degrees C (open cup) (Budavari, 1996; HSDB , 1999; ITI, 1995; Snyder, 1992)

25 degrees C (open cup) (Lewis, 1997)

77 degrees F (open cup) (Lewis, 1997)

81 degrees F (open cup) (CHRIS , 1999)

25 degrees C (OHM/TADS , 1999)

72 degrees F (NIOSH , 1999)

53-77 degrees F (AAR, 1998)

AUTOIGNITION TEMPERATURE

404 degrees C (ITI, 1995)

412 degrees C (HSDB , 1999; ILO, 1998; Snyder, 1992)

371 degrees C (OHM/TADS , 1999)

824 degrees F (Lewis, 1996)

775 degrees F (HSDB , 1999)

700 degrees F; 371 degrees C (AAR, 1998; (Lewis, 1997)

EXPLOSIVE LIMITS

LOWER

2.1% (ACGIH, 1991; CHRIS , 1999; Lewis, 1996; OHM/TADS , 1999)
2.2% (NIOSH , 1999; Sittig, 1991)
2% (ITI, 1995; Lewis, 1997)
2.29% (HSDB , 1999)

UPPER

13.5% (ACGIH, 1991; CHRIS , 1999; Lewis, 1996; OHM/TADS , 1999)
13.7% (NIOSH , 1999; Sittig, 1991)
13% (ITI, 1995; Lewis, 1997)

SOLUBILITY

IN WATER

Propyl alcohol is miscible with water (Ashford, 1994; Budavari, 1996; Howard, 1990).
Propyl alcohol is fully soluble in water (AAR, 1998; (ACGIH, 1991).

IN ORGANIC SOLVENTS

Propyl alcohol is miscible with oxygenated solvents such as alcohol and ether (ACGIH, 1991; Ashford, 1994; Budavari, 1996; Snyder, 1992). It is soluble in benzene and acetone (ACGIH, 1991; Budavari, 1996; Snyder, 1992).

OCTANOL/WATER PARTITION COEFFICIENT

log Kow = 0.25 (Howard, 1990; HSDB , 1999)

HENRY'S CONSTANT

6.85x10(-6) atm-m(3)/mol (at 25 degrees C) (Howard, 1990)

SPECTRAL CONSTANTS

10961 (Sadtler Research Laboratories IR Grating Collection) (HSDB , 1999)

MASS

40 (Atlas of Mass Spectral Data, John Wiley & Sons, New York) (HSDB , 1999)

OTHER/PHYSICAL

ODOR THRESHOLD

2.6-40 ppm (ACGIH, 1991)
30 ppm (75 mg/m(3)) (Harbison, 1998)
0.075-150 mg/m(3) (HSDB , 1999)
75-500 mg/m(3) (HSDB , 1999)
LIQUID

9.00 mg/L (HSDB , 1999)

9.00X10(-3) mg/L (HSDB , 1999)
2.80X10(-6) g/L (HSDB , 1999)
3.86X10(-5) g/L (HSDB , 1999)

SURFACE TENSION

25.9 dynes/cm (at -5 degrees C) (HSDB , 1999)
23.8 dynes/cm (at 20 degrees C) (HSDB , 1999)
20.5 dynes/cm (at 60 degrees C) (HSDB , 1999)

CRITICAL PRESSURE

750 psia; 51 atm; MN/m(2) (CHRIS , 1999)

CRITICAL TEMPERATURE

263.6 degrees C; 506.5 degrees F; 536.8 degrees K (CHRIS , 1999)
263.7 degrees C (HSDB , 1999)

DIELECTRIC CONSTANT

22.2 (at 20 degrees C) (HSDB , 1999)
20.33 (at 25 degrees C) (HSDB , 1999)

DIPOLE MOMENT

GAS: 1.67 (HSDB , 1999)
LIQUID: 1.75 in benzene (at 25 degrees C) (HSDB , 1999)

HEAT OF COMBUSTION

-13130 Btu/lb; -7296 cal/g; -305.5x10(5) J/kg (CHRIS , 1999)
482.75 kg cal/g mol wt (at 25 degrees C) (HSDB , 1999)

HEAT OF FUSION

20.66 cal/g (CHRIS , 1999)

IONIZATION POTENTIAL

10.15 eV (NIOSH , 1999)

NUCLEAR MAGNETIC RESONANCE

43 (Varian Associates NMR Spectra Catalogue) (HSDB , 1999)

VISCOSITY

2.256 cP (at 20 degrees C) (Lewis, 1997)
3.883 cP (at 0 degrees C) (HSDB , 1999)
1.405 cP (at 40 degrees C) (HSDB , 1999)
0.5310 cP (at 90 degrees C) (HSDB , 1999)

-REFERENCES

GENERAL BIBLIOGRAPHY

40 CFR 372.28: Environmental Protection Agency - Toxic Chemical Release Reporting, Community Right-To-Know, Lower thresholds for chemicals of special concern. National Archives and Records Administration (NARA) and the Government Printing Office (GPO). Washington, DC. Final rules current as of Apr 3, 2006.

40 CFR 372.65: Environmental Protection Agency - Toxic Chemical Release Reporting, Community Right-To-Know, Chemicals and Chemical Categories to which this part applies. National Archives and Records Association (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Apr 3, 2006.

49 CFR 172.101 - App. B: Department of Transportation - Table of Hazardous Materials, Appendix B: List of Marine Pollutants. National Archives and Records Administration (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Aug 29, 2005.

49 CFR 172.101: Department of Transportation - Table of Hazardous Materials. National Archives and Records Administration (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Aug 11, 2005.

62 FR 58840: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 1997.

65 FR 14186: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

65 FR 39264: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

65 FR 77866: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

66 FR 21940: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2001.

67 FR 7164: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2002.

68 FR 42710: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2003.

69 FR 54144: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2004.

ACGIH: Documentation of the Threshold Limit Values and Biological Exposure Indices, 6th ed, Am Conference of Govt Ind Hyg, Inc, Cincinnati, OH, 1991.

AIHA: 2006 Emergency Response Planning Guidelines and Workplace Environmental Exposure Level Guides Handbook, American Industrial Hygiene Association, Fairfax, VA, 2006.

American Conference of Governmental Industrial Hygienists : ACGIH 2010 Threshold Limit Values (TLVs(R)) for Chemical Substances and Physical Agents and Biological Exposure Indices (BEIs(R)), American Conference of Governmental Industrial Hygienists, Cincinnati, OH, 2010.

Ansell-Edmont: SpecWare Chemical Application and Recommendation Guide. Ansell-Edmont. Coshocton, OH. 2001. Available from URL: http://www.ansellpro.com/specware. As accessed 10/31/2001.

Ashford R: Ashford's Dictionary of Industrial Chemicals, Wavelength Publications Ltd, London, England, 1994.

Babanov GP: Iss Viniti 1984; 4561-4584.

Bata Shoe Company: Industrial Footwear Catalog, Bata Shoe Company, Belcamp, MD, 1995.

Best Manufacturing: ChemRest Chemical Resistance Guide. Best Manufacturing. Menlo, GA. 2002. Available from URL: http://www.chemrest.com. As accessed 10/8/2002.

Best Manufacturing: Degradation and Permeation Data. Best Manufacturing. Menlo, GA. 2004. Available from URL: http://www.chemrest.com/DomesticPrep2/. As accessed 04/09/2004.

Bittersohl G: Arch Geschwulstforch 1974; 43:250-253.

Boss Manufacturing Company: Work Gloves, Boss Manufacturing Company, Kewanee, IL, 1998.

Bretschneider K: Z Gesamte Hyg Grenzgeb 1972; 18:717-720.

Budavari S: The Merck Index, 12th ed, Merck & Co, Inc, Whitehouse Station, NJ, 1996.

Burgess JL, Kirk M, Borron SW, et al: Emergency department hazardous materials protocol for contaminated patients. Ann Emerg Med 1999; 34(2):205-212.

CHRIS : CHRIS Hazardous Chemical Data. US Department of Transportation, US Coast Guard. Washington, DC (Internet Version). Edition expires 1999; provided by Truven Health Analytics Inc., Greenwood Village, CO.

Cameron AM: Arch Toxicol 1985; Suppl 8:422-424.

ChemFab Corporation: Chemical Permeation Guide Challenge Protective Clothing Fabrics, ChemFab Corporation, Merrimack, NH, 1993.

Clayton GD & Clayton FE: Patty's Industrial Hygiene and Toxicology, Vol 2D. Toxicology, 4th ed, John Wiley & Sons, New York, NY, 1994.

Comasec Safety, Inc.: Chemical Resistance to Permeation Chart. Comasec Safety, Inc.. Enfield, CT. 2003. Available from URL: http://www.comasec.com/webcomasec/english/catalogue/mtabgb.html. As accessed 4/28/2003.

Comasec Safety, Inc.: Product Literature, Comasec Safety, Inc., Enfield, CT, 2003a.

DFG: List of MAK and BAT Values 2002, Report No. 38, Deutsche Forschungsgemeinschaft, Commission for the Investigation of Health Hazards of Chemical Compounds in the Work Area, Wiley-VCH, Weinheim, Federal Republic of Germany, 2002.

DuPont: DuPont Suit Smart: Interactive Tool for the Selection of Protective Apparel. DuPont. Wilmington, DE. 2002. Available from URL: http://personalprotection.dupont.com/protectiveapparel/suitsmart/smartsuit2/na_english.asp. As accessed 10/31/2002.

DuPont: Permeation Guide for DuPont Tychem Protective Fabrics. DuPont. Wilmington, DE. 2003. Available from URL: http://personalprotection.dupont.com/en/pdf/tyvektychem/pgcomplete20030128.pdf. As accessed 4/26/2004.

DuPont: Permeation Test Results. DuPont. Wilmington, DE. 2002a. Available from URL: http://www.tyvekprotectiveapprl.com/databases/default.htm. As accessed 7/31/2002.

EPA: Search results for Toxic Substances Control Act (TSCA) Inventory Chemicals. US Environmental Protection Agency, Substance Registry System, U.S. EPA's Office of Pollution Prevention and Toxics. Washington, DC. 2005. Available from URL: http://www.epa.gov/srs/.

ERG: Emergency Response Guidebook. A Guidebook for First Responders During the Initial Phase of a Dangerous Goods/Hazardous Materials Incident, U.S. Department of Transportation, Research and Special Programs Administration, Washington, DC, 2004.

Gaede D & Diese M: Naunyn-Schmiedebergs Archiv Fuer Pharmakologie Und Experimentelle 1949; 206:569-583.

Gibel W: Arch Geschwulstforsch 1975; 45:19-24.

Grant KA & Samson HH: Neurobehav Toxicol Teratol 1984; 6:165-169.

Guardian Manufacturing Group: Guardian Gloves Test Results. Guardian Manufacturing Group. Willard, OH. 2001. Available from URL: http://www.guardian-mfg.com/guardianmfg.html. As accessed 12/11/2001.

HSDB : Hazardous Substances Data Bank. National Library of Medicine. Bethesda, MD (Internet Version). Edition expires 1992; provided by Truven Health Analytics Inc., Greenwood Village, CO.

HSDB : Hazardous Substances Data Bank. National Library of Medicine. Bethesda, MD (Internet Version). Edition expires 1999; provided by Truven Health Analytics Inc., Greenwood Village, CO.

Harbison RD: Hamilton & Hardy's Industrial Toxicology, 5th ed, Mosby-Year Books, St. Louis, MO, 1998.

Hillbom ME: Res Comm Chem Pathol Pharmacol 1974; 9:177-180.

Howard PH: Handbook of Environmental Fate and Exposure Data for Organic Chemicals. Volume II: Solvents, Lewis Publishers, Chelsea, MI, 1990.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: 1,3-Butadiene, Ethylene Oxide and Vinyl Halides (Vinyl Fluoride, Vinyl Chloride and Vinyl Bromide), 97, International Agency for Research on Cancer, Lyon, France, 2008.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Formaldehyde, 2-Butoxyethanol and 1-tert-Butoxypropan-2-ol, 88, International Agency for Research on Cancer, Lyon, France, 2006.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Household Use of Solid Fuels and High-temperature Frying, 95, International Agency for Research on Cancer, Lyon, France, 2010a.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Smokeless Tobacco and Some Tobacco-specific N-Nitrosamines, 89, International Agency for Research on Cancer, Lyon, France, 2007.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Some Non-heterocyclic Polycyclic Aromatic Hydrocarbons and Some Related Exposures, 92, International Agency for Research on Cancer, Lyon, France, 2010.

IARC: List of all agents, mixtures and exposures evaluated to date - IARC Monographs: Overall Evaluations of Carcinogenicity to Humans, Volumes 1-88, 1972-PRESENT. World Health Organization, International Agency for Research on Cancer. Lyon, FranceAvailable from URL: http://monographs.iarc.fr/monoeval/crthall.html. As accessed Oct 07, 2004.

ICAO: Technical Instructions for the Safe Transport of Dangerous Goods by Air, 2003-2004. International Civil Aviation Organization, Montreal, Quebec, Canada, 2002.

ILC Dover, Inc.: Ready 1 The Chemturion Limited Use Chemical Protective Suit, ILC Dover, Inc., Frederica, DE, 1998.

ILO: Encyclopaedia of Occupational Health and Safety, 4th ed. Vol 1-4, International Labour Organization, Geneva, Switzerland, 1998.

ITI: Toxic and Hazardous Industrial Chemicals Safety Manual, The International Technical Information Institute, Tokyo, Japan, 1995.

International Agency for Research on Cancer (IARC): IARC monographs on the evaluation of carcinogenic risks to humans: list of classifications, volumes 1-116. International Agency for Research on Cancer (IARC). Lyon, France. 2016. Available from URL: http://monographs.iarc.fr/ENG/Classification/latest_classif.php. As accessed 2016-08-24.

International Agency for Research on Cancer: IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. World Health Organization. Geneva, Switzerland. 2015. Available from URL: http://monographs.iarc.fr/ENG/Classification/. As accessed 2015-08-06.

Kappler, Inc.: Suit Smart. Kappler, Inc.. Guntersville, AL. 2001. Available from URL: http://www.kappler.com/suitsmart/smartsuit2/na_english.asp?select=1. As accessed 7/10/2001.

Khachaturyan MK: Sanit-Tiksikol Metody Issled Gig, 1975.

Kimberly-Clark, Inc.: Chemical Test Results. Kimberly-Clark, Inc.. Atlanta, GA. 2002. Available from URL: http://www.kc-safety.com/tech_cres.html. As accessed 10/4/2002.

LaCrosse-Rainfair: Safety Products, LaCrosse-Rainfair, Racine, WI, 1997.

Lasne C: Mutat Res 1984; 130:273-282.

Leblanc AE & Kalant H: Toxicol Appl Pharmacol 1975; 32:123-128.

Lewis RJ: Hawley's Condensed Chemical Dictionary, 13th ed, John Wiley & Sons, Inc, New York, NY, 1997.

Lewis RJ: Sax's Dangerous Properties of Industrial Materials, 9th ed, Van Nostrand Reinhold Company, New York, NY, 1996.

MAPA Professional: Chemical Resistance Guide. MAPA North America. Columbia, TN. 2003. Available from URL: http://www.mapaglove.com/pro/ChemicalSearch.asp. As accessed 4/21/2003.

MAPA Professional: Chemical Resistance Guide. MAPA North America. Columbia, TN. 2004. Available from URL: http://www.mapaglove.com/ProductSearch.cfm?id=1. As accessed 6/10/2004.

Mar-Mac Manufacturing, Inc: Product Literature, Protective Apparel, Mar-Mac Manufacturing, Inc., McBee, SC, 1995.

Marigold Industrial: US Chemical Resistance Chart, on-line version. Marigold Industrial. Norcross, GA. 2003. Available from URL: www.marigoldindustrial.com/charts/uschart/uschart.html. As accessed 4/14/2003.

Memphis Glove Company: Permeation Guide. Memphis Glove Company. Memphis, TN. 2001. Available from URL: http://www.memphisglove.com/permeation.html. As accessed 7/2/2001.

Montgomery Safety Products: Montgomery Safety Products Chemical Resistant Glove Guide, Montgomery Safety Products, Canton, OH, 1995.

NFPA: Fire Protection Guide to Hazardous Materials, 13th ed., National Fire Protection Association, Quincy, MA, 2002.

NIOSH : Pocket Guide to Chemical Hazards. National Institute for Occupational Safety and Health. Cincinnati, OH (Internet Version). Edition expires 1999; provided by Truven Health Analytics Inc., Greenwood Village, CO.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 1, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2001.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 2, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2002.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 3, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2003.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 4, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2004.

Nat-Wear: Protective Clothing, Hazards Chart. Nat-Wear. Miora, NY. 2001. Available from URL: http://www.natwear.com/hazchart1.htm. As accessed 7/12/2001.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2,3-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2,4-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2-Butylene Oxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648083cdbb&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2-Dibromoethane (Proposed). United States Environmental Protection Agency. Washington, DC. 2007g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064802796db&disposition=attachment&contentType=pdf. As accessed 2010-08-18.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,3,5-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 2-Ethylhexyl Chloroformate (Proposed). United States Environmental Protection Agency. Washington, DC. 2007b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648037904e&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Acrylonitrile (Proposed). United States Environmental Protection Agency. Washington, DC. 2007c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648028e6a3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Adamsite (Proposed). United States Environmental Protection Agency. Washington, DC. 2007h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Agent BZ (3-quinuclidinyl benzilate) (Proposed). United States Environmental Protection Agency. Washington, DC. 2007f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ad507&disposition=attachment&contentType=pdf. As accessed 2010-08-18.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Allyl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648039d9ee&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Aluminum Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Arsenic Trioxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2007m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480220305&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Automotive Gasoline Unleaded (Proposed). United States Environmental Protection Agency. Washington, DC. 2009a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cc17&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Biphenyl (Proposed). United States Environmental Protection Agency. Washington, DC. 2005j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064801ea1b7&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bis-Chloromethyl Ether (BCME) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006n. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648022db11&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Boron Tribromide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ae1d3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bromine Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2007d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648039732a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bromoacetone (Proposed). United States Environmental Protection Agency. Washington, DC. 2008e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809187bf&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Calcium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Carbonyl Fluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ae328&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Carbonyl Sulfide (Proposed). United States Environmental Protection Agency. Washington, DC. 2007e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648037ff26&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Chlorobenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2008c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803a52bb&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Cyanogen (Proposed). United States Environmental Protection Agency. Washington, DC. 2008f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809187fe&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Dimethyl Phosphite (Proposed). United States Environmental Protection Agency. Washington, DC. 2009. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbf3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Diphenylchloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648091884e&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyl Phosphorodichloridate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480920347&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2008g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809203e7&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Germane (Proposed). United States Environmental Protection Agency. Washington, DC. 2008j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963906&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Hexafluoropropylene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064801ea1f5&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ketene (Proposed). United States Environmental Protection Agency. Washington, DC. 2007. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ee7c&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Magnesium Aluminum Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Magnesium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Malathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2009k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809639df&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Mercury Vapor (Proposed). United States Environmental Protection Agency. Washington, DC. 2009b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a8a087&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl Isothiocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963a03&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl Parathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2008l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963a57&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl tertiary-butyl ether (Proposed). United States Environmental Protection Agency. Washington, DC. 2007a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064802a4985&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methylchlorosilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2005. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5f4&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyldichlorosilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2005a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c646&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN1 CAS Reg. No. 538-07-8) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN2 CAS Reg. No. 51-75-2) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN3 CAS Reg. No. 555-77-1) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Tetroxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008n. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648091855b&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Trifluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963e0c&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Parathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2008o. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963e32&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Perchloryl Fluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e268&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Perfluoroisobutylene (Proposed). United States Environmental Protection Agency. Washington, DC. 2009d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e26a&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008p. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096dd58&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyl Mercaptan (Proposed). United States Environmental Protection Agency. Washington, DC. 2006d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020cc0c&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phorate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008q. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096dcc8&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phosgene (Draft-Revised). United States Environmental Protection Agency. Washington, DC. 2009e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a8a08a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phosgene Oxime (Proposed). United States Environmental Protection Agency. Washington, DC. 2009f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e26d&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Potassium Cyanide (Proposed). United States Environmental Protection Agency. Washington, DC. 2009g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbb9&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Potassium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Propargyl Alcohol (Proposed). United States Environmental Protection Agency. Washington, DC. 2006e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec91&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Selenium Hexafluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2006f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec55&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Silane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d523&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sodium Cyanide (Proposed). United States Environmental Protection Agency. Washington, DC. 2009h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbb9&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sodium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Strontium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sulfuryl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2006h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec7a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tear Gas (Proposed). United States Environmental Protection Agency. Washington, DC. 2008s. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e551&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tellurium Hexafluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e2a1&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tert-Octyl Mercaptan (Proposed). United States Environmental Protection Agency. Washington, DC. 2008r. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e5c7&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tetramethoxysilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d632&disposition=attachment&contentType=pdf. As accessed 2010-08-17.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethoxysilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d632&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethyl Phosphite (Proposed). United States Environmental Protection Agency. Washington, DC. 2009j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7d608&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethylacetyl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008t. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e5cc&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Zinc Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for n-Butyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064808f9591&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Institute for Occupational Safety and Health: NIOSH Pocket Guide to Chemical Hazards, U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, Cincinnati, OH, 2007.

National Research Council : Acute exposure guideline levels for selected airborne chemicals, 5, National Academies Press, Washington, DC, 2007.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 6, National Academies Press, Washington, DC, 2008.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 7, National Academies Press, Washington, DC, 2009.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 8, National Academies Press, Washington, DC, 2010.

Neese Industries, Inc.: Fabric Properties Rating Chart. Neese Industries, Inc.. Gonzales, LA. 2003. Available from URL: http://www.neeseind.com/new/TechGroup.asp?Group=Fabric+Properties&Family=Technical. As accessed 4/15/2003.

Nelson BK: Neurobehav Toxicol Teratol 1985; 7:779-783.

North: Chemical Resistance Comparison Chart - Protective Footwear . North Safety. Cranston, RI. 2002. Available from URL: http://www.linkpath.com/index2gisufrm.php?t=N-USA1. As accessed April 30, 2004.

North: eZ Guide Interactive Software. North Safety. Cranston, RI. 2002a. Available from URL: http://www.northsafety.com/feature1.htm. As accessed 8/31/2002.

OHM/TADS : Oil and Hazardous Materials/Technical Assistance Data System. US Environmental Protection Agency. Washington, DC (Internet Version). Edition expires 1999; provided by Truven Health Analytics Inc., Greenwood Village, CO.

Oedkvisi LM: Adv Oto-Rhino-Laryngol 25. Iss Front Vestibular Oculo-Mot Res 1979; 167-172.

Park KK & Archer MC: Chem-Biol Interact 1978; 22:83-90.

Parris GE & Venables L: Chemical Hazard Information Profile. USEPA, 1983.

Playtex: Fits Tough Jobs Like a Glove, Playtex, Westport, CT, 1995.

RTECS : Registry of Toxic Effects of Chemical Substances. National Institute for Occupational Safety and Health. Cincinnati, OH (Internet Version). Edition expires 1992; provided by Truven Health Analytics Inc., Greenwood Village, CO.

River City: Protective Wear Product Literature, River City, Memphis, TN, 1995.

Safety 4: North Safety Products: Chemical Protection Guide. North Safety. Cranston, RI. 2002. Available from URL: http://www.safety4.com/guide/set_guide.htm. As accessed 8/14/2002.

Servus: Norcross Safety Products, Servus Rubber, Servus, Rock Island, IL, 1995.

Sittig M: Handbook of Toxic and Hazardous Chemicals and Carcinogens, 3rd ed, Noyes Publications, Park Ridge, NJ, 1991.

Snyder R: Ethel Browning's Toxicity and Metabolism of Industrial Solvents: Alcohols and Esters, 2nd ed, 3, Elsevier Science Publishing Company, Inc, New York, NY, 1992.

Standard Safety Equipment: Product Literature, Standard Safety Equipment, McHenry, IL, 1995.

Tingley: Chemical Degradation for Footwear and Clothing. Tingley. South Plainfield, NJ. 2002. Available from URL: http://www.tingleyrubber.com/tingley/Guide_ChemDeg.pdf. As accessed 10/16/2002.

Trelleborg-Viking, Inc.: Chemical and Biological Tests (database). Trelleborg-Viking, Inc.. Portsmouth, NH. 2002. Available from URL: http://www.trelleborg.com/protective/. As accessed 10/18/2002.

Trelleborg-Viking, Inc.: Trellchem Chemical Protective Suits, Interactive manual & Chemical Database. Trelleborg-Viking, Inc.. Portsmouth, NH. 2001.

U.S. Department of Energy, Office of Emergency Management: Protective Action Criteria (PAC) with AEGLs, ERPGs, & TEELs: Rev. 26 for chemicals of concern. U.S. Department of Energy, Office of Emergency Management. Washington, DC. 2010. Available from URL: http://www.hss.doe.gov/HealthSafety/WSHP/Chem_Safety/teel.html. As accessed 2011-06-27.

U.S. Department of Health and Human Services, Public Health Service, National Toxicology Project : 11th Report on Carcinogens. U.S. Department of Health and Human Services, Public Health Service, National Toxicology Program. Washington, DC. 2005. Available from URL: http://ntp.niehs.nih.gov/INDEXA5E1.HTM?objectid=32BA9724-F1F6-975E-7FCE50709CB4C932. As accessed 2011-06-27.

U.S. Environmental Protection Agency: Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof. Environmental Protection Agency's (EPA) Resource Conservation and Recovery Act (RCRA); List of hazardous substances and reportable quantities 2010b; 40CFR(261.33, e-f):77-.

U.S. Environmental Protection Agency: Integrated Risk Information System (IRIS). U.S. Environmental Protection Agency. Washington, DC. 2011. Available from URL: http://cfpub.epa.gov/ncea/iris/index.cfm?fuseaction=iris.showSubstanceList&list_type=date. As accessed 2011-06-21.

U.S. Environmental Protection Agency: List of Radionuclides. U.S. Environmental Protection Agency. Washington, DC. 2010a. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-sec302-4.pdf. As accessed 2011-06-17.

U.S. Environmental Protection Agency: List of hazardous substances and reportable quantities. U.S. Environmental Protection Agency. Washington, DC. 2010. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-sec302-4.pdf. As accessed 2011-06-17.

U.S. Environmental Protection Agency: The list of extremely hazardous substances and their threshold planning quantities (CAS Number Order). U.S. Environmental Protection Agency. Washington, DC. 2010c. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-part355.pdf. As accessed 2011-06-17.

U.S. Occupational Safety and Health Administration: Part 1910 - Occupational safety and health standards (continued) Occupational Safety, and Health Administration's (OSHA) list of highly hazardous chemicals, toxics and reactives. Subpart Z - toxic and hazardous substances. CFR 2010 2010; Vol6(SEC1910):7-.

U.S. Occupational Safety, and Health Administration (OSHA): Process safety management of highly hazardous chemicals. 29 CFR 2010 2010; 29(1910.119):348-.

United States Environmental Protection Agency Office of Pollution Prevention and Toxics: Acute Exposure Guideline Levels (AEGLs) for Vinyl Acetate (Proposed). United States Environmental Protection Agency. Washington, DC. 2006. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6af&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

Urben PG: Bretherick's Handbook of Reactive Chemical Hazards, Volume 1, 5th ed, Butterworth-Heinemann Ltd, Oxford, England, 1995.

Wells Lamont Industrial: Chemical Resistant Glove Application Chart. Wells Lamont Industrial. Morton Grove, IL. 2002. Available from URL: http://www.wellslamontindustry.com. As accessed 10/31/2002.

Workrite: Chemical Splash Protection Garments, Technical Data and Application Guide, W.L. Gore Material Chemical Resistance Guide, Workrite, Oxnard, CA, 1997.

FeedBack

N-PROPANOL

Classification | Information to evaluate chemical incidents

Information to evaluate chemical incidents

Information to evaluate chemical incidents

Information to evaluate chemical incidents