EYE EXPOSURE - Immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical.

DERMAL EXPOSURE - Flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.

INHALATION EXPOSURE - Move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.

ORAL EXPOSURE - If this chemical has been swallowed, get medical attention immediately.

TARGET ORGANS - Eyes, skin, respiratory system, and central nervous system (National Institute for Occupational Safety and Health, 2007).

Move victims of inhalation exposure from the toxic environment and administer 100% humidified supplemental oxygen with assisted ventilation as required. Exposed skin and eyes should be copiously flushed with water. Ingestion may result in significant esophageal or gastrointestinal tract irritation or burns, and EMESIS SHOULD NOT BE INDUCED. Cautious gastric lavage followed by administration of activated charcoal may be of benefit if the patient is seen soon after the exposure.

INHALATION: Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with an inhaled beta2-adrenergic agonist. Consider systemic corticosteroids in patients with significant bronchospasm.

DECONTAMINATION: Remove contaminated clothing and jewelry and place them in plastic bags. Wash exposed areas with soap and water for 10 to 15 minutes with gentle sponging to avoid skin breakdown. A physician may need to examine the area if irritation or pain persists (Burgess et al, 1999).

DECONTAMINATION: Remove contact lenses and irrigate exposed eyes with copious amounts of room temperature 0.9% saline or water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist after 15 minutes of irrigation, the patient should be seen in a healthcare facility.

Do not induce emesis.

Significant esophageal or gastrointestinal tract irritation or burns may occur following ingestion. The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation.

GASTRIC LAVAGE: Consider after ingestion of a potentially life-threatening amount of poison if it can be performed soon after ingestion (generally within 1 hour). Protect airway by placement in the head down left lateral decubitus position or by endotracheal intubation. Control any seizures first.

ACTIVATED CHARCOAL: Administer charcoal as a slurry (240 mL water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents, 25 to 50 g in children (1 to 12 years), and 1 g/kg in infants less than 1 year old.

Adopted Value

TWA: 100 ppm (525 mg/m(3))

STEL:

Ceiling:

Carcinogen Listing: (Not Listed) Not Listed

Skin Designation: Not Listed

Note(s):

IDLH: 1000 ppm

Note(s): Not Listed

8-hour TWA:

5000 (2270)

Health Rating (Blue): 1

Flammability Rating (Red): 3

Instability Rating (Yellow): 0

Oxidizer/Water-Reactive Designation: Not Listed

Neoprene

Plastic Laminate

Polyvinyl Chloride

Specific recommendations and test data for this product type were not found in the available manufacturers' product literature.

Butyl

Natural Rubber

Neoprene

Neoprene+NatR

Nitrile

Nitrile+PVC

Viton/Butyl

Viton over Butyl

This section provides a compilation of chemical resistance information and test data for specific protective clothing products. Chemical resistance information includes both degradation resistance ratings and permeation resistance data. This information is designed to assist in the selection of appropriate protective clothing. Only data on specific products and manufacturers are included. Generic information or recommendations are not provided since significant differences can exist in the chemical resistance for apparent similar product types.

Specific product information is organized by general product type (gloves, garments, and footwear), material type, and manufacturer. The category 'garments' may include totally encapsulating suits, splash suits, as well as other items (e.g., coveralls, jackets, and aprons). Specific manufacturers should be contacted to determine the features of available styles/models.

In addition to chemical resistance information, there are many critical variables in the selection of protective clothing which cannot be represented in this summary of the literature. Some factors to be considered in choosing protective clothing include, but are not limited to: overall clothing integrity, physical hazard resistance, durability, human factors, ease of decontamination, and cost. Overall clothing integrity refers to a specific design's ability to offer consistent protection for all clothing-covered areas of the body. Physical hazards include resisting the effects of abrasion, cuts, tears, and punctures. Human factors entail effects on wearer mobility, visibility, and hearing for garments; dexterity, tactility, and grip for gloves; ankle support and weight for footwear; and, any effect of the clothing on the function of the wearer. There are several variations in the design for gloves, garments, and footwear that affect these factors. Protective clothing must properly be sized and correctly fit the wearer to ensure its proper use and function.

As required in the U.S.A., protective clothing should be selected based on a risk assessment of the workplace. This risk assessment must account for the identification of existing as well as potential hazards and involve the recommendation of protective clothing appropriate for the identified hazards. Therefore, the recommendations in this section should not be used as the sole basis for decisions on choice of protective clothing, but rather should be used as a tool by qualified occupational health and safety professionals or other technically qualified persons in conjunction with a review of all mitigating factors. Consult the OSHA PPE Standard (29 CFR 1910.132 - 1910.138) for regulations and additional guidance regarding the selection and use of protective clothing and equipment. For general information on protective clothing selection, refer to the "PERSONAL PROTECTIVE EQUIPMENT - OSHA PUB 3077" document.

PROTECTIVE CLOTHING SELECTION

INTERPRETATION OF DEGRADATION RATINGS

INTERPRETATION OF PERMEATION DATA

Best Manufacturing 579 Edison Street Menlo, GA 30731 USA Phone: (706) 862-2302 Fax: (706) 862-6000 Toll-Free: (800) 241-0323 Website: http://www.bestglove.com Email: USA@bestglove.com

DuPont Personal Protection P. O. Box 80705 Wilmington, DE 19880-0705 USA Phone: (302) 774-1000 Toll-Free: (800) 931-3456 Website: http://personalprotection.dupont.com Email: personalprotection@usa.dupont.com

MAPA Spontex, Inc. 100 Spontex Dr. Columbia, TN 38401 USA Phone: (800) 537--2897 Fax: (800) 537--3299 Website: http://www.mapaglove.com Email: sales@mapaglove.com

River City 5321 East Shelby Dr. Memphis, TN 38188 USA Phone: (800) 888-0347 Fax: (901) 795-3815 Toll-Free: (800) 888-0347 Website: http://www.protectivewear.com Email: support@protectivewear.com

CHEMICAL PROTECTIVE CLOTHING CITATIONS

(3) Flammable. Liquids and solids that can be ignited under almost all ambient temperature conditions. Including liquids with a flash point below 73 degrees F and a boiling point above 100 degrees F, solid materials which form coarse dusts that burn rapidly without becoming explosive, materials which burn rapidly by reason of self-contained oxygen (ie, organic peroxides), and materials which ignite spontaneously when exposed to air.

5: Flammable liquid fires can be extinguished using carbon dioxide, dry chemical, foam, and vaporizing liquid extinguishers, as long as the fires are small to moderate in size and the flammable liquid reservoir is shallow. Use of foam to form a blanket over a flammable liquid is not effective when the liquid is water-soluble. Certain alcohol resistant foams are effective extinguishing agents for polar, non-polar, and water-soluble liquid fires. These foams are preferred for fighting flammable liquid fires except those that involve water reactive flammable liquids.

1: "Water may be ineffective" applies to a situation where materials with a flash point below 100 degrees F (37.8 degrees C) are burning. Water will only be effective if used by experienced fire fighters under favorable conditions. Even though water may not put the fire out, it can be used to protect equipment and structures.

MEXICO:

ARGENTINA:

BRAZIL:

COLUMBIA:

CANADA:

UNITED STATES:

TEEL-0: The threshold concentration below which most people will experience no adverse health effects.

TEEL-1: The airborne concentration (expressed as ppm [parts per million] or mg/m(3) [milligrams per cubic meter]) of a substance above which it is predicted that the general population, including susceptible individuals, could experience notable discomfort, irritation, or certain asymptomatic, nonsensory effects. However, these effects are not disabling and are transient and reversible upon cessation of exposure.

TEEL-2: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience irreversible or other serious, long-lasting, adverse health effects or an impaired ability to escape.

TEEL-3: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience life-threatening adverse health effects or death.