HYDROGEN BROMIDE

Hydrogen bromide and hydrobromic acid are used in analytical chemistry, in organic synthesis, and in the manufacture of inorganic and organic bromides by direct reaction with alcohols. Hydrogen bromide is also used as a controlled oxidation catalyst, as an alkylation catalyst for aromatic compounds, and as a reducing agent, as well as in the isomerization of conjugated diolefins (Lewis, 1993; Budavari, 1989).
Hydrogen bromide is also used as a pharmaceutical intermediate. Hydrobromic acid is used as a solvent for certain mineral ores and as a reagent in medicine (Lewis, 1993; HSDB , 1995).
Hydrobromic acid has been used as a sedative in veterinary medicine (Budavari, 1989).

-CLINICAL EFFECTS

GENERAL CLINICAL EFFECTS

Hydrogen bromide is a corrosive irritant of the eyes, skin, and mucous membranes. Exposure to the gas may cause death as a result of edema or spasm of the larynx. Upper respiratory tract inflammation and pulmonary edema may occur.

Contact with solutions may cause burns of the eyes, skin, and mucous membranes. Contact with the escaping liquid may cause frostbite.

POTENTIAL HEALTH HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

TOXIC; may be fatal if inhaled, ingested or absorbed through skin.
Vapors are extremely irritating and corrosive.
Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite.
Fire will produce irritating, corrosive and/or toxic gases.
Runoff from fire control may cause pollution.

POTENTIAL HEALTH HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death.
Contact with molten substance may cause severe burns to skin and eyes.
Avoid any skin contact.
Effects of contact or inhalation may be delayed.
Fire may produce irritating, corrosive and/or toxic gases.
Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

-MEDICAL TREATMENT

LIFE SUPPORT

Support respiratory and cardiovascular function.

SUMMARY

FIRST AID - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Move victim to fresh air.
Call 911 or emergency medical service.
Give artificial respiration if victim is not breathing.
Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes.
In case of contact with liquefied gas, thaw frosted parts with lukewarm water.
In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes.
In case of contact with Hydrogen fluoride, anhydrous (UN1052), flush skin and eyes with water for 5 minutes; then, for skin exposures rub on a calcium/jelly combination; for eyes flush with a water/calcium solution for 15 minutes.
Keep victim warm and quiet.
Keep victim under observation.
Effects of contact or inhalation may be delayed.
Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

FIRST AID - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Move victim to fresh air.
Call 911 or emergency medical service.
Give artificial respiration if victim is not breathing.
Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes.
In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes.
For minor skin contact, avoid spreading material on unaffected skin.
Keep victim warm and quiet.
Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed.
Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

FIRST AID

FIRST AID

EYE EXPOSURE - If solution containing the contaminant contacts the eyes, immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical.

If eye tissue is frozen, seek medical attention immediately; if tissue is not frozen, immediately and thoroughly flush the eyes with large amounts of water for at least 15 minutes, occasionally lifting the lower and upper eyelids. If irritation, pain, swelling, lacrimation, or photophobia persist, get medical attention as soon as possible.

DERMAL EXPOSURE - If solution containing the contaminant contacts the skin,immediately flush the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. Get medical attention promptly.

If frostbite has occurred, seek medical attention immediately; do NOT rub the affected areas or flush them with water. In order to prevent further tissue damage, do NOT attempt to remove frozen clothing from frostbitten areas. If frostbite has NOT occurred, immediately and thoroughly wash contaminated skin with soap and water.

INHALATION EXPOSURE - Move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.
ORAL EXPOSURE - If solution containing the contaminant has been swallowed, get medical attention immediately.
TARGET ORGANS - Eyes, skin, and respiratory system (National Institute for Occupational Safety and Health, 2007).

GENERAL

Move victims of inhalation exposure from the toxic environment and administer 100% humidified supplemental oxygen with assisted ventilation as required. Exposed skin and eyes should be copiously flushed with water. Ingestion may result in significant esophageal or gastrointestinal tract irritation or burns, and EMESIS SHOULD NOT BE INDUCED. Cautious gastric lavage followed by administration of activated charcoal may be of benefit if the patient is seen soon after the exposure.
If frostbite has occurred, seek medical attention immediately. Do not rub the affected area, flush with water, or attempt to remove clothing.

INHALATION EXPOSURE

INHALATION: Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with an inhaled beta2-adrenergic agonist. Consider systemic corticosteroids in patients with significant bronchospasm.
If bronchospasm and wheezing occur, consider treatment with inhaled sympathomimetic agents.
ACUTE LUNG INJURY: Maintain ventilation and oxygenation and evaluate with frequent arterial blood gases and/or pulse oximetry monitoring. Early use of PEEP and mechanical ventilation may be needed.

DERMAL EXPOSURE

DECONTAMINATION: Remove contaminated clothing and jewelry and place them in plastic bags. Wash exposed areas with soap and water for 10 to 15 minutes with gentle sponging to avoid skin breakdown. A physician may need to examine the area if irritation or pain persists (Burgess et al, 1999).
Treat dermal irritation or burns with standard topical therapy. Patients developing dermal hypersensitivity reactions may require treatment with systemic or topical corticosteroids or antihistamines.
If frostbite has occurred, seek medical attention immediately. Do not rub the affected area, flush with water, or attempt to remove clothing.

EYE EXPOSURE

DECONTAMINATION: Remove contact lenses and irrigate exposed eyes with copious amounts of room temperature 0.9% saline or water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist after 15 minutes of irrigation, the patient should be seen in a healthcare facility.
If frostbite has occurred, seek medical attention immediately.

INGESTION EXPOSURE

Because of the potential for gastrointestinal tract irritation, do not induce emesis.
Significant esophageal or gastrointestinal tract irritation or burns may occur following ingestion. The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation.
GASTRIC LAVAGE: Consider after ingestion of a potentially life-threatening amount of poison if it can be performed soon after ingestion (generally within 1 hour). Protect airway by placement in the head down left lateral decubitus position or by endotracheal intubation. Control any seizures first.

CONTRAINDICATIONS: Loss of airway protective reflexes or decreased level of consciousness in unintubated patients; following ingestion of corrosives; hydrocarbons (high aspiration potential); patients at risk of hemorrhage or gastrointestinal perforation; and trivial or non-toxic ingestion.

ACTIVATED CHARCOAL: Administer charcoal as a slurry (240 mL water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents, 25 to 50 g in children (1 to 12 years), and 1 g/kg in infants less than 1 year old.
Observe patients with ingestion carefully for the possible development of esophageal or gastrointestinal tract irritation or burns. If signs or symptoms of esophageal irritation or burns are present, consider endoscopy to determine the extent of injury.

-RANGE OF TOXICITY

MINIMUM LETHAL EXPOSURE

GENERAL/SUMMARY

The minimum lethal human dose to this agent has not been delineated.

MAXIMUM TOLERATED EXPOSURE

ROUTE OF EXPOSURE

All six human subjects exposed to hydrogen bromide by inhalation at 5 and 6 ppm experienced nasal irritation, and one subject also reported throat irritation. Only one of the six experienced nose and throat irritation at 3 ppm, and none of the subjects reported any negative effects at 2 ppm. The odor of the gas was detectable at all concentrations between 2 and 6 ppm (ACGIH, 1991).

Carcinogenicity Ratings for CAS10035-10-6 :

ACGIH (American Conference of Governmental Industrial Hygienists, 2010): Not Listed ; Listed as: Hydrogen bromide
EPA (U.S. Environmental Protection Agency, 2011): Not Listed
IARC (International Agency for Research on Cancer (IARC), 2016; International Agency for Research on Cancer, 2015; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2010; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2010a; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2008; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2007; IARC Working Group on the Evaluation of Carcinogenic Risks to Humans, 2006; IARC, 2004): Not Listed
NIOSH (National Institute for Occupational Safety and Health, 2007): Not Listed ; Listed as: Hydrogen bromide
MAK (DFG, 2002): Not Listed
NTP (U.S. Department of Health and Human Services, Public Health Service, National Toxicology Project ): Not Listed

TOXICITY AND RISK ASSESSMENT VALUES

EPA IRIS

EPA Risk Assessment Values for CAS10035-10-6 (U.S. Environmental Protection Agency, 2011):

Not Listed

TOXICITY VALUES

References: RTECS, 1995 ITI, 1988 ACGIH, 1991
- LC50- (INHALATION)MOUSE:
- LC50- (INHALATION)RAT:
- LD50- (INTRAPERITONEAL)RAT:
- TCLo- (INHALATION)HUMAN:

CALCULATIONS

AMBIENT CONVERSIONS

CONVERSION FACTORS

1 ppm = 3.36 mg/m(3)

Conversion factor at 68 degrees F and 760 mmHg (NIOSH, 1995) -

-STANDARDS AND LABELS

WORKPLACE STANDARDS

ACGIH TLV Values for CAS10035-10-6 (American Conference of Governmental Industrial Hygienists, 2010):

Editor's Note: The listed values are recommendations or guidelines developed by ACGIH(R) to assist in the control of health hazards. They should only be used, interpreted and applied by individuals trained in industrial hygiene. Before applying these values, it is imperative to read the introduction to each section in the current TLVs(R) and BEI(R) Book and become familiar with the constraints and limitations to their use. Always consult the Documentation of the TLVs(R) and BEIs(R) before applying these recommendations and guidelines.

Adopted Value

Hydrogen bromide

TLV:

TLV-TWA:
TLV-STEL:
TLV-Ceiling: 2 ppm

Notations and Endnotes:

Carcinogenicity Category: Not Listed
Codes: Not Listed
Definitions: Not Listed

TLV Basis - Critical Effect(s): URT irr
Molecular Weight: 80.92

For gases and vapors, to convert the TLV from ppm to mg/m(3):

[(TLV in ppm)(gram molecular weight of substance)]/24.45

For gases and vapors, to convert the TLV from mg/m(3) to ppm:

[(TLV in mg/m(3))(24.45)]/gram molecular weight of substance

AIHA WEEL Values for CAS10035-10-6 (AIHA, 2006):

Not Listed

NIOSH REL and IDLH Values for CAS10035-10-6 (National Institute for Occupational Safety and Health, 2007):

Listed as: Hydrogen bromide
REL:

TWA:
STEL:
Ceiling: 3 ppm (10 mg/m(3))
Carcinogen Listing: (Not Listed) Not Listed
Skin Designation: Not Listed
Note(s):

IDLH:

IDLH: 30 ppm
Note(s): Not Listed

OSHA PEL Values for CAS10035-10-6 (U.S. Occupational Safety, and Health Administration (OSHA), 2010):

Listed as: Hydrogen bromide
Table Z-1 for Hydrogen bromide:

8-hour TWA:

ppm: 3

Parts of vapor or gas per million parts of contaminated air by volume at 25 degrees C and 760 torr.

mg/m3: 10

Milligrams of substances per cubic meter of air. When entry is in this column only, the value is exact; when listed with a ppm entry, it is approximate.

Ceiling Value:
Skin Designation: No
Notation(s): Not Listed

OSHA List of Highly Hazardous Chemicals, Toxics, and Reactives for CAS10035-10-6 (U.S. Occupational Safety and Health Administration, 2010):

Threshold Quantity, in pounds:5000

ENVIRONMENTAL STANDARDS

EPA CERCLA, Hazardous Substances and Reportable Quantities for CAS10035-10-6 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA CERCLA, Hazardous Substances and Reportable Quantities, Radionuclides for CAS10035-10-6 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA RCRA Hazardous Waste Number for CAS10035-10-6 (U.S. Environmental Protection Agency, 2010b):

Not Listed
Editor's Note: The D, F, and K series waste numbers and Appendix VIII to Part 261 -- Hazardous Constituents were not included. Please refer to 40 CFR Part 261.

EPA SARA Title III, Extremely Hazardous Substance List for CAS10035-10-6 (U.S. Environmental Protection Agency, 2010):

Not Listed

EPA SARA Title III, Community Right-to-Know for CAS10035-10-6 (40 CFR 372.65, 2006; 40 CFR 372.28, 2006):

Not Listed

DOT List of Marine Pollutants for CAS10035-10-6 (49 CFR 172.101 - App. B, 2005):

Not Listed

EPA TSCA Inventory for CAS10035-10-6 (EPA, 2005):

Listed as: Hydrobromic acid

SHIPPING REGULATIONS

SURFACE

DOT -- Table of Hazardous Materials and Special Provisions for UN/NA Number 1048 (49 CFR 172.101, 2005):

Hazardous materials descriptions and proper shipping name: Hydrogen bromide, anhydrous

Symbol(s): Not Listed
Hazard class or Division: 2.3

2.3: Poisonous gas. See 49 CFR section 173.115 for definitions.

Identification Number: UN1048
Packing Group: Not Listed
Label(s) required (if not excepted): 2.3, 8

2.3: Poison Gas.
8: Corrosive.

Special Provisions: 3, B14

3: This material is poisonous by inhalation (see sxn. 171.8 of this subchapter) in Hazard Zone C (see sxn. 173.116(a) of this subchapter), and must be described as an inhalation hazard under the provisions of this subchapter.
B14: Each bulk packaging, except a tank car or a multi-unit-tank car tank, must be insulated with an insulating material so that the overall thermal conductance at 15.5 °C (60 °F) is no more than 1.5333 kilojoules per hour per square meter per degree Celsius (0.075 Btu per hour per square foot per degree Fahrenheit) temperature differential. Insulating materials must not promote corrosion to steel when wet.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: None
Non-bulk packaging: 304
Bulk packaging: 314, 315

Quantity Limitations:

Passenger aircraft or railcar: Forbidden
Cargo aircraft only: 25 kg

Vessel Stowage Requirements:

Vessel stowage location: D

D: The material must be stowed "on deck only" on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers or one passenger per each 3 m of overall vessel length, but the material is prohibited on passenger vessels in which the limiting number of passengers is exceeded.

Vessel stowage other: 40

40: Stow "clear of living quarters".

DOT -- Table of Hazardous Materials and Special Provisions for UN/NA Number 1788 (49 CFR 172.101, 2005):

Hazardous materials descriptions and proper shipping name: Hydrobromic acid, with more than 49 percent hydrobromic acid

Symbol(s): Not Listed
Hazard class or Division: 8

8: Corrosive material. See 49 CFR section 173.136 for definitions.

Identification Number: UN1788
Packing Group: II

II: Packing Group II - indicates the degree of danger presented by the material is medium.

Label(s) required (if not excepted): 8

8: Corrosive.

Special Provisions: B2, B15, IB2, N41, T7, TP2

B2: MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are not authorized.
B15: Packagings must be protected with non-metallic linings impervious to the lading or have a suitable corrosion allowance.
IB2: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130kPa at 55 °C (1.3 bar at 131 °F) are authorized.
N41: Metal construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material.
T7: Minimum test pressure (bar): 4; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP2: a. The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 95/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, tf is the temperature in degrees celsius of the liquid during filling, and alpha is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transportation (tr) both in degrees celsius; and b. For liquids transported under ambient conditions a may be calculated using the formula: [alpha = (d15-d50)/(35 x d50)], where d15 and d50 are the densities (in units of mass per unit volume) of the liquid at 15 degrees C (59 degrees F) and 50 degrees C (122 degrees F), respectively.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 154
Non-bulk packaging: 202
Bulk packaging: 242

Quantity Limitations:

Passenger aircraft or railcar: Forbidden
Cargo aircraft only: Forbidden

Vessel Stowage Requirements:

Vessel stowage location: C

C: The material must be stowed "on deck only" on a cargo vessel and on a passenger vessel.

Vessel stowage other: Not Listed

Hazardous materials descriptions and proper shipping name: Hydrobromic acid, with more than 49 percent hydrobromic acid

Symbol(s): Not Listed
Hazard class or Division: 8

8: Corrosive material. See 49 CFR section 173.136 for definitions.

Identification Number: UN1788
Packing Group: III

III: Packing Group III - indicates the degree of danger presented by the material is minor.

Label(s) required (if not excepted): 8

8: Corrosive.

Special Provisions: IB3, T4, TP1

IB3: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130 kPa at 55 °C (1.3 bar at 131 °F) are authorized, except for UN2672 (also see Special Provision IP8 in Table 3 for UN2672).
T4: Minimum test pressure (bar): 2.65; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP1: The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 97/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 154
Non-bulk packaging: 203
Bulk packaging: 241

Quantity Limitations:

Passenger aircraft or railcar: Forbidden
Cargo aircraft only: Forbidden

Vessel Stowage Requirements:

Vessel stowage location: C

C: The material must be stowed "on deck only" on a cargo vessel and on a passenger vessel.

Vessel stowage other: 8

8: Glass carboys not permitted on passenger vessels.

Hazardous materials descriptions and proper shipping name: Hydrobromic acid, with not more than 49 percent hydrobromic acid

Symbol(s): Not Listed
Hazard class or Division: 8

8: Corrosive material. See 49 CFR section 173.136 for definitions.

Identification Number: UN1788
Packing Group: II

II: Packing Group II - indicates the degree of danger presented by the material is medium.

Label(s) required (if not excepted): 8

8: Corrosive.

Special Provisions: A3, A6, B2, B15, IB2, N41, T7, TP2

A3: For combination packagings, if glass inner packagings (including ampoules) are used, they must be packed with absorbent material in tightly closed metal receptacles before packing in outer packagings.
A6: For combination packagings, if plastic inner packagings are used, they must be packed in tightly closed metal receptacles before packing in outer packagings.
B2: MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are not authorized.
B15: Packagings must be protected with non-metallic linings impervious to the lading or have a suitable corrosion allowance.
IB2: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130kPa at 55 °C (1.3 bar at 131 °F) are authorized.
N41: Metal construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material.
T7: Minimum test pressure (bar): 4; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP2: a. The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 95/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, tf is the temperature in degrees celsius of the liquid during filling, and alpha is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transportation (tr) both in degrees celsius; and b. For liquids transported under ambient conditions a may be calculated using the formula: [alpha = (d15-d50)/(35 x d50)], where d15 and d50 are the densities (in units of mass per unit volume) of the liquid at 15 degrees C (59 degrees F) and 50 degrees C (122 degrees F), respectively.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 154
Non-bulk packaging: 202
Bulk packaging: 242

Quantity Limitations:

Passenger aircraft or railcar: 1 L
Cargo aircraft only: 30 L

Vessel Stowage Requirements:

Vessel stowage location: C

C: The material must be stowed "on deck only" on a cargo vessel and on a passenger vessel.

Vessel stowage other: Not Listed

Hazardous materials descriptions and proper shipping name: Hydrobromic acid, with not more than 49 percent hydrobromic acid

Symbol(s): Not Listed
Hazard class or Division: 8

8: Corrosive material. See 49 CFR section 173.136 for definitions.

Identification Number: UN1788
Packing Group: III

III: Packing Group III - indicates the degree of danger presented by the material is minor.

Label(s) required (if not excepted): 8

8: Corrosive.

Special Provisions: A3, IB3, T4, TP1

A3: For combination packagings, if glass inner packagings (including ampoules) are used, they must be packed with absorbent material in tightly closed metal receptacles before packing in outer packagings.
IB3: Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130 kPa at 55 °C (1.3 bar at 131 °F) are authorized, except for UN2672 (also see Special Provision IP8 in Table 3 for UN2672).
T4: Minimum test pressure (bar): 2.65; Minimum shell thickness (in mm-reference steel) (See sxn.178.274(d)): sxn.178.274(d)(2); Pressure-relief requirements (See sxn.178.275(g)): Normal; Bottom opening requirements (See sxn.178.275(d)): sxn.178.275(d)(3).
TP1: The maximum degree of filling must not exceed the degree of filling determined by the following: [Degree of filling = 97/1+alpha(tr - tf)], where tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Packaging Authorizations (refer to 49 CFR 173.***):

Exceptions: 154
Non-bulk packaging: 203
Bulk packaging: 241

Quantity Limitations:

Passenger aircraft or railcar: 5 L
Cargo aircraft only: 60 L

Vessel Stowage Requirements:

Vessel stowage location: C

C: The material must be stowed "on deck only" on a cargo vessel and on a passenger vessel.

Vessel stowage other: 8

8: Glass carboys not permitted on passenger vessels.

ICAO International Shipping Name for UN1048 (ICAO, 2002):

Proper Shipping Name: Hydrogen bromide, anhydrous
UN Number: 1048

ICAO International Shipping Name for UN1788 (ICAO, 2002):

Proper Shipping Name: Hydrobromic acid, more than 49% strength
UN Number: 1788
Proper Shipping Name: Hydrobromic acid, not more than 49% strength
UN Number: 1788

LABELS

NFPA

NFPA Hazard Ratings for CAS10035-10-6 (NFPA, 2002):

Not Listed

-HANDLING AND STORAGE

HANDLING

When handling hydrogen bromide, tools and facilities made of fluoric resins, vinyl chloride resins, polyethylene, or glass should be used. Direct contact with metals, wood, textiles, fibers, or parts of the body should be avoided (ITI, 1988).

STORAGE

CONTAINER

Containers should be protected from physical damage (HSDB , 1995). Keep hydrobromic acid solutions protected from light (Lewis, 1992).
Hydrogen bromide must be shipped in cylinders (AAR, 1994). It is usually in the form of gas over liquid (Budavari, 1989).
Hydrobromic acid solutions are shipped in glass or polyethylene bottles, drums lined with polyethylene, carboys, tanks on trucks, railcars, or barges (NFPA, 1994).

ROOM/CABINET RECOMMENDATIONS

Hydrogen bromide should be stored in a cool, well-ventilated location (HSDB , 1995).

INCOMPATIBILITIES

Hydrogen bromide aqueous solutions slowly darken when exposed to air and light (Budavari, 1989).
Hydrogen bromide should be separated from oxidizing and alkaline materials, amines, halogens, moisture, and metals such as copper, brass, and zinc (NIOSH, 1995; (NFPA, 1994).

-PERSONAL PROTECTION

SUMMARY

RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Wear positive pressure self-contained breathing apparatus (SCBA).
Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection.
Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.

RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Wear positive pressure self-contained breathing apparatus (SCBA).
Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection.
Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.

Personnel fighting fires or handling hydrogen bromide or hydrobromic acid should avoid bodily contact with the material, keep upwind, and avoid breathing the vapors. Positive pressure self-contained breathing apparatus and appropriate chemical protective clothing, including gloves, boots, and goggles, should be worn. Broken containers or packages should not be handled without protective clothing, and any material that contacts the body should be washed away with copious amounts of water (AAR, 1994; (NFPA, 1994).

RESPIRATORY PROTECTION

Refer to "Recommendations for respirator selection" in the NIOSH Pocket Guide to Chemical Hazards on TOMES Plus(R) for respirator information.

PROTECTIVE CLOTHING

CHEMICAL PROTECTIVE CLOTHING. Search results for CAS 10035-10-6.

All data are compiled from published sources and are NOT recommended specifically by Truven Health Analytics. The appearance of specific manufacturers or products in this section does not represent an endorsement by Truven Health Analytics. No attempt has been made to verify the data presented. All product recommendations should be confirmed with the specific manufacturer for verification of product performance.
CLOTHING

Chlorinated Polyethylene

DuPont Personal Protection

Durables 2

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None detected
Notes: Not Listed
Citation: (DuPont, 2002)

Neoprene

National Safety Wear

Nation splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natprene splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Nattuf splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe II splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe I splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe V

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neosafe VI

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Tingley Rubber Corporation

Premier, Magnaprene

Degradation Rating: Poor
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Neoprene+Latex

Neese Industries, Inc.

Neoprene splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

Neoprene+PVC

National Safety Wear

Natchem Splash Suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Paracril+PVC

National Safety Wear

Natweb splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natwork splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Plastic Laminate

DuPont Personal Protection

Responder

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None detected
Notes: Not Listed
Citation: (DuPont, 2002)

Responder Plus

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): None detected
Notes: Not Listed
Citation: (DuPont, 2002)

Tychem 10,000

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.028
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.028
Notes: gas
Citation: (DuPont, 2002)

Tychem 7500

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)

Tychem 9400

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: gas
Citation: (DuPont, 2002)

Tychem BR

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (DuPont, 2002)

Tychem LV

Degradation Rating: Not Listed
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (DuPont, 2003)
Degradation Rating: Not Listed
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (DuPont, 2003)

Tychem QC

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)

Tychem SL

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): Not Tested
Permeation Rate (mcg/cm2/min): Not Tested
Notes: gas
Citation: (DuPont, 2002)

Tychem ThermoPro

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): 0.0001
Notes: Not Listed
Citation: (DuPont, 2003)

Tychem TK

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: gas
Citation: (DuPont, 2002)
Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >480
Permeation Rate (mcg/cm2/min): <0.1
Notes: gas
Citation: (DuPont, 2002)

Polyurethane

National Safety Wear

Natflex splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natsoft splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neese Industries, Inc.

Polyurethane splash suits

Degradation Rating: Fair
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

Tingley Rubber Corporation

Iron Eagle, Eagle

Degradation Rating: Poor
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Polyvinyl Chloride

National Safety Wear

Natcide splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natcon splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natlite II splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natlite I splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Natpro splash suit

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Nat-Wear, 2001)

Neese Industries, Inc.

PVC splash suits

Degradation Rating: Excellent
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Neese Industries, Inc., 2003)

Tingley Rubber Corporation

American, Scrim, DuraScrim, PVC Polyester, Double-Ply PVC, PVC Film

Degradation Rating: Poor
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Webdri, Safetyflex, Electra, ElectraBrite

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Teflon Laminate

Mar-Mac Manufacturing, Inc.

Commander Ultrapro

Degradation Rating: No Degradation Rating provided
Breakthrough Time (minutes): >180
Permeation Rate (mcg/cm2/min): <0.1
Notes: Not Listed
Citation: (Mar-Mac Manufacturing, Inc, 1995)

FOOTWEAR

Natural Rubber

Tingley Rubber Corporation

Molded Overshoes, Hand-Made Footwear

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Neoprene

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

North -- Safety 4H

Neoprene series - specific style not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Servus (Norcross Safety Products)

Neoprene III

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

Tingley Rubber Corporation

Molded Overshoes, Hand-Made Footwear

Degradation Rating: Poor
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Nitrile+PVC

Onguard Industries

Heartland

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polyurethane+PVC

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Onguard Industries

Polyblend

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Superpoly

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polyurethane Blend

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Not Recommended
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Polyvinyl Chloride

LaCrosse-Rainfair Safety Products

Resistor

Degradation Rating: Not Recommended
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

North -- Safety 4H

PVC Series - specific style not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Servus (Norcross Safety Products)

Supreme

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

Tingley Rubber Corporation

Two Stage Injection Molded, Better Grade, General Purpose, Workbrutes

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Two Stage Injection Molded, Premier

Degradation Rating: Good
Breakthrough Time (minutes): Not reported
Permeation Rate (mcg/cm2/min): Not reported
Notes: Not Listed
Citation: (Tingley, 2002)

Rubber

North -- Safety 4H

Rubber Series - specific style not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (North, 2002)

Rubber blend

LaCrosse-Rainfair Safety Products

Not specified

Degradation Rating: Excellent
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (LaCrosse-Rainfair, 1997)

Onguard Industries

Bluemax

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Polymax

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Standard

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Bata Shoe Company, 1995)

Servus (Norcross Safety Products)

Not specified

Degradation Rating: Good
Breakthrough Time (minutes): Not Listed
Permeation Rate (mcg/cm2/min): Not Listed
Notes: Not Listed
Citation: (Servus, 1995)

GLOVES

Specific recommendations and test data for this product type were not found in the available manufacturers' product literature.

GENERAL INFORMATION

This section provides a compilation of chemical resistance information and test data for specific protective clothing products. Chemical resistance information includes both degradation resistance ratings and permeation resistance data. This information is designed to assist in the selection of appropriate protective clothing. Only data on specific products and manufacturers are included. Generic information or recommendations are not provided since significant differences can exist in the chemical resistance for apparent similar product types.
Specific product information is organized by general product type (gloves, garments, and footwear), material type, and manufacturer. The category 'garments' may include totally encapsulating suits, splash suits, as well as other items (e.g., coveralls, jackets, and aprons). Specific manufacturers should be contacted to determine the features of available styles/models.
In addition to chemical resistance information, there are many critical variables in the selection of protective clothing which cannot be represented in this summary of the literature. Some factors to be considered in choosing protective clothing include, but are not limited to: overall clothing integrity, physical hazard resistance, durability, human factors, ease of decontamination, and cost. Overall clothing integrity refers to a specific design's ability to offer consistent protection for all clothing-covered areas of the body. Physical hazards include resisting the effects of abrasion, cuts, tears, and punctures. Human factors entail effects on wearer mobility, visibility, and hearing for garments; dexterity, tactility, and grip for gloves; ankle support and weight for footwear; and, any effect of the clothing on the function of the wearer. There are several variations in the design for gloves, garments, and footwear that affect these factors. Protective clothing must properly be sized and correctly fit the wearer to ensure its proper use and function.
As required in the U.S.A., protective clothing should be selected based on a risk assessment of the workplace. This risk assessment must account for the identification of existing as well as potential hazards and involve the recommendation of protective clothing appropriate for the identified hazards. Therefore, the recommendations in this section should not be used as the sole basis for decisions on choice of protective clothing, but rather should be used as a tool by qualified occupational health and safety professionals or other technically qualified persons in conjunction with a review of all mitigating factors. Consult the OSHA PPE Standard (29 CFR 1910.132 - 1910.138) for regulations and additional guidance regarding the selection and use of protective clothing and equipment. For general information on protective clothing selection, refer to the "PERSONAL PROTECTIVE EQUIPMENT - OSHA PUB 3077" document.
PROTECTIVE CLOTHING SELECTION

Determine the type of protective clothing item needed based on a risk assessment (e.g., gloves, garments, footwear).
For high risk situations, choose clothing that covers all parts of the body that may be exposed. In many cases, multiple clothing items will be required. Low risk situations may permit partial body protective clothing. Select protective clothing products that have reported chemical resistance data. High risk situations involving full body clothing or extended chemical contact often require permeation resistance data to determine the barrier effectiveness of materials used in the construction of clothing. Relatively low risk situations, where only splash or incidental exposure occur, may allow use of protective clothing based on degradation or penetration resistance data. Specifics on the interpretation of chemical resistance data are presented below.
Other factors must be considered in addition to chemical resistance. The selected chemical protective clothing item should offer the optimal combination of protection against identified hazards while allowing maximum function and comfort.

INTERPRETATION OF DEGRADATION RATINGS

Degradation refers to physical changes in a material as the result of chemical exposure. Degradation may become evident in visible changes, such as discoloration, swelling, delamination, deterioration, or disintegration. Degradation effects may also be measured by weight change or other changes in a material's physical properties (e.g., strength, elasticity, hardness).
Degradation resistance ratings are provided by manufacturers to rate the amount of degradation that occurs for a particular protective clothing material when contacted by a chemical. All degradation ratings are qualitative and include ratings, such as "EXCELLENT," "GOOD," "FAIR," "POOR," and "NOT RECOMMENDED." There is no standard test method for the measurement of chemical degradation resistance; therefore, manufacturer ratings may be based on different testing approaches. This makes comparison of degradation ratings between manufacturers unreliable.
The use of degradation resistance ratings alone to recommend protective clothing, particularly for high hazard situations, should be avoided. Degradation resistance testing does not directly assess the barrier quality of protective clothing, since materials can show relatively little degradation but still allow either permeation or penetration by a chemical. Degradation resistance ratings can be used to exclude protective clothing materials from consideration. Protective clothing materials with a "NOT RECOMMENDED" degradation resistance rating should never be used.
For some products, the rating "NO PENETRATION" is provided. This refers to penetration resistance test results that are based on a different procedure (American Society for Testing and Materials (ASTM) Standard Test Method F 903). Penetration resistance testing involves placing a material sample in a test cell, exposing the exterior side of the material to a chemical, and then observing the interior side of the material for visible signs of liquid penetration. Part of the test is conducted at an elevated pressure. Test results are reported as pass (no penetration) or fail (penetration detected). Unlike degradation testing, penetration testing provides an assessment of protective clothing material barrier performance. Since penetration resistance testing examines only observable amounts of liquid penetration, permeation may still occur. The use of penetration resistance data must be restricted to liquid chemicals, and should be limited to scenarios where there is no reasonable vapor exposure hazard under the conditions of exposure.

INTERPRETATION OF PERMEATION DATA

Permeation is the process of chemical movement through a material on a molecular level. Permeation resistance refers to the ability of a material to retard or prevent chemical movement through it. Permeation may occur without any visible signs of degradation.
Permeation resistance is measured using a test cell which is divided into two halves by a protective clothing specimen. Chemical is placed on the challenge side, while the collection side is periodically monitored for permeating chemical. Permeation data were obtained in accordance with the American Society for Testing and Materials (ASTM) Standard Test Method F 739 (Resistance of Materials Used in Protective Clothing to Permeation by Liquids and Gases), unless stated otherwise. In the case of chemicals that are classified as warfare agents, the data were obtained in accordance with the Military Standard 282 (MIL-STD-282) (Military Standard, Filter Units, Protective Clothing, Gas-Mask Components, and Related Products: Performance Test Methods).
Permeation rate is the amount of chemical that passes through a material for a measured surface area per unit time. In this section, permeation rate is expressed in micrograms per square centimeter per minute (mcg/cm(2)/min). The reported permeation rate is either the steady-state rate or the maximum rate observed during testing. In some cases, very large permeation rates exceed measurement techniques and are reported as ">" (greater than) or "HIGH."
Breakthrough time is the elapsed time, in minutes, from the time the chemical comes in contact with the material exterior surface, to the time that chemical is detected on the interior surface. When no breakthrough is detected, the breakthrough time is report as ">" the testing period. If permeation breakthrough is rapid, results are reported as "<" (less than) the earlier sampling time or as "IMMEDIATELY" (which usually means breakthrough in less than 4 minutes).
The breakthrough time should exceed the expected use period of the selected protective clothing. Additionally, there are several other factors that must be taken into account to provide appropriate protection.
Permeation testing is usually conducted with full strength, undiluted chemical for the duration of the test period. Actual exposures may involve diluted chemical for short or intermittent exposure periods.
Permeation testing is usually conducted at room temperature. Permeation occurs faster at elevated temperatures (short breakthrough times and higher permeation rates) and slower at reduced temperatures (long breakthrough times and lower permeation rates).
Permeation resistance of mixtures cannot usually be determined on the basis of the individual chemicals making up the mixture. Synergistic effects may occur and result in more rapid permeation than accounted for by the individual mixture chemicals.
Permeation rates may be used to calculate potential wearer exposure; however, several assumptions must be made about the extent of exposure and condition of clothing wear. Furthermore, there are few chemicals with dermal exposure limits, making it difficult to determine an acceptable skin exposure level.

COMPANY INFORMATION

DuPont Personal Protection P. O. Box 80705 Wilmington, DE 19880-0705 USA Phone: (302) 774-1000 Toll-Free: (800) 931-3456 Website: http://personalprotection.dupont.com Email: personalprotection@usa.dupont.com
LaCrosse-Rainfair Safety Products 18550 NE Riverside Parkway Portland, OR 97230 USA Phone: (800) 557-7246 Fax: (800) 558-0188 Toll-Free: (800) 557-7246 Website: http://www.lacrosserainfair.com Email: info@lacrossesafety.com
Mar-Mac Manufacturing, Inc. P. O. Box P.O. Box 278 McBee, SC 29101 USA Phone: (843) 335-8211 Fax: (843) 355-8599 Toll-Free: (843) 335-8211 Website: http://www.marmac.com Email: info@marmac.com
National Safety Wear 9 High Street Miora, NY 12957 USA Phone: (800) 833-7270 Fax: (518) 529-7401 Toll-Free: (800) 833-7270 Website: http://www.natwear.com Email: sales@natwear.com
Neese Industries, Inc. 10646 Airline Hwy Gonzales, LA 70737 USA Phone: (225) 647-6553 Fax: (225) 644-3517 Toll-Free: (800) 535-8042 Website: http://www.neeseind.com Email: customerservice@neeseind.com
North -- Safety 4H 2000 Plainfield Pike Cranston, RI 02921 USA Phone: (800) 430-4110 Fax: (800) 572-6346 Toll-Free: (800) 430-4110 Website: http://www.safety4.com
Onguard Industries 1850 Clark Road Havre de Grace, MD 21078 USA Phone: (410) 272-2000 Fax: (800) 304-2282 Toll-Free: (800) 365-2282 Website: http://www.onguardindustries.com Email: support@onguardindustries.com
Servus (Norcross Safety Products) 1136 Second St Rock Island, IL 61202 USA Phone: (800) 777-9021 Fax: (800) 267-6809 Toll-Free: (800) 777-9021 Website: http://www.servusproducts.com Email: info@nspusa.com
Tingley Rubber Corporation One Cragwood Road PO Box 100 South Plainfield, NJ 07080 USA Phone: (800) 631-5498 Fax: (866) 757-9239 Toll-Free: (800) 631-5498 Website: http://www.tingleyrubber.com

REFERENCES

CHEMICAL PROTECTIVE CLOTHING CITATIONS

The following sources were consulted for chemical protective clothing data:

(Ansell-Edmont, 2001)
(Bata Shoe Company, 1995)
(Best Manufacturing, 2002)
(Best Manufacturing, 2004)
(Boss Manufacturing Company, 1998)
(ChemFab Corporation, 1993)
(Comasec Safety, Inc., 2003)
(Comasec Safety, Inc., 2003a)
(DuPont, 2002)
(DuPont, 2002)
(DuPont, 2003)
(Guardian Manufacturing Group, 2001)
(ILC Dover, Inc., 1998)
(Kappler Inc., 2001)
(Kimberly-Clark, 2002)
(LaCrosse-Rainfair, 1997)
(MAPA Professional, 2003)
(MAPA Professional, 2004)
(Mar-Mac Manufacturing, Inc, 1995)
(Marigold Industrial, 2003)
(Memphis Glove Company, 2001)
(Montgomery Safety Products, 1995)
(Nat-Wear, 2001)
(Neese Industries, Inc., 2003)
(North, 2002)
(North, 2002)
(Playtex, 1995)
(River City, 1995)
(Safety 4, 2002)
(Servus, 1995)
(Standard Safety Equipment, 1995)
(Tingley, 2002)
(Trelleborg-Viking, Inc., 2001)
(Trelleborg-Viking, Inc., 2002)
(Wells Lamont Industrial, 2002)
(Workrite, 1997)

-PHYSICAL HAZARDS

FIRE HAZARD

SUMMARY

Editor's Note: Information from more than one emergency response guide is associated with this material.
POTENTIAL FIRE OR EXPLOSION HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)
- Some may burn, but none ignite readily.
- Vapors from liquefied gas are initially heavier than air and spread along ground.
- Some of these materials may react violently with water.
- Cylinders exposed to fire may vent and release toxic and/or corrosive gas through pressure relief devices.
- Containers may explode when heated.
- Ruptured cylinders may rocket.
POTENTIAL FIRE OR EXPLOSION HAZARDS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)
- Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
- Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.).
- Contact with metals may evolve flammable hydrogen gas.
- Containers may explode when heated.
Hydrogen bromide and hydrobromic acid are not flammable but may emit toxic and corrosive fumes if heated to decomposition (NFPA, 1994)

FLAMMABILITY CLASSIFICATION

NFPA Flammability Rating for CAS10035-10-6 (NFPA, 2002):

Not Listed

FIRE CONTROL/EXTINGUISHING AGENTS

SMALL FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Dry chemical or CO2.

SMALL FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Dry chemical, CO2 or water spray.

LARGE FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Water spray, fog or regular foam.
Move containers from fire area if you can do it without risk.
Do not get water inside containers.
Damaged cylinders should be handled only by specialists.

LARGE FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Dry chemical, CO2, alcohol-resistant foam or water spray.
Move containers from fire area if you can do it without risk.
Dike fire control water for later disposal; do not scatter the material.

TANK OR CAR/TRAILER LOAD FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Fight fire from maximum distance or use unmanned hose holders or monitor nozzles.
Do not get water inside containers.
Cool containers with flooding quantities of water until well after fire is out.
Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.
ALWAYS stay away from tanks engulfed in fire.

TANK FIRE PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Fight fire from maximum distance or use unmanned hose holders or monitor nozzles.
Cool containers with flooding quantities of water until well after fire is out.
Do not direct water at source of leak or safety devices; icing may occur.
Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.
ALWAYS stay away from tanks engulfed in fire.

NFPA Extinguishing Methods for CAS10035-10-6 (NFPA, 2002):

Not Listed

Fires should be extinguished using material appropriate for surrounding fire since hydrogen bromide itself is nonflammable. Flooding quantities of water should be used to keep containers cool, and can also be used as fog to knock down vapors. Personnel should avoid toxic vapors by approaching the fire from upwind and applying water from as far away as possible (AAR, 1994; (NFPA, 1994).

COMBUSTION TOXICITY

Hydrogen bromide emits irritating and toxic vapors when heated to decomposition (NFPA, 1994).
When hydrobromic acid is heated to decomposition or when reacting with water or steam, corrosive and toxic fumes of bromide and hydrogen bromide are produced (Lewis, 1992).
Flammable hydrogen gas is liberated when hydrogen bromide contacts metals (ITI, 1988).

EXPLOSION HAZARD

Containers of hydrogen bromide may rupture or rocket if involved in fire (AAR, 1994). Toxic and irritating vapors may be liberated if this occurs (CHRIS , 1995).

The rapid reaction of hydrogen bromide and ozone will cause explosion, except at pressures below 2 to 3 mmHg. This may occur even at temperatures down to minus 104 degrees C (NFPA, 1994; Bretherick, 1990).

DUST/VAPOR HAZARD

Hydrogen bromide emits corrosive, irritating and toxic vapors when heated to decomposition (NFPA, 1994; Lewis, 1992). Hydrogen gas is liberated when it contacts metals (ITI, 1988).

Fumes from hydrobromic acid are irritating to the eyes and mucous membranes and corrosive to metals and tissue (AAR, 1994).

REACTIVITY HAZARD

The rapid reaction of hydrogen bromide and ozone will cause explosion, except at pressures below 2 to 3 mmHg. This may occur even at temperatures down to minus 104 degrees C (NFPA, 1994; Bretherick, 1990).

Hydrobromic acid will react with fluorine, causing flame (NFPA, 1994).

Hydrogen bromide reacts vigorously with ammonia. This reaction occurs even at minus 80 degrees C with very dried reactants (NFPA, 1994).

Hydrobromic acid will also react violently with iron oxide (Fe2O3) (Lewis, 1992).

When hydrobromic acid is heated to decomposition or when reacting with water or steam, corrosive and toxic fumes of bromide and hydrogen bromide are produced (Lewis, 1992).

Flammable hydrogen gas is liberated when hydrogen bromide contacts metals (ITI, 1988).

Hydrobromic acid is extremely corrosive to most metals (NIOSH, 1995).

Hydrogen bromide reacts moderately with water and heat is evolved during the process (CHRIS , 1995).

Hydrogen bromide fumes in the presence of moisture, creating sour-tasting clouds (Budavari, 1989).

EVACUATION PROCEDURES

SUMMARY

Initial Isolation and Protective Action Distances (ERG, 2004)

Data presented from the Emergency Response Guidebook Table of Initial Isolation and Protective Action Distances are for use when a spill has occurred and there is no fire. If there is a fire, or if a fire is involved, evacuation information presented under FIRE - PUBLIC SAFETY EVACUATION DISTANCES should be used.
Generally, a small spill is one that involves a single, small package such as a drum containing up to approximately 200 liters, a small cylinder, or a small leak from a large package. A large spill is one that involves a spill from a large package, or multiple spills from many small packages.
Suggested distances to protect from vapors of toxic-by-inhalation and/or water-reactive materials during the first 30 minutes following the spill.

DOT ID No. 1048 - Hydrogen bromide, anhydrous

SMALL SPILLS

First isolate in all directions: 30 meters (100 feet).
Note wind direction.
Then protect persons downwind:

during the DAY for: 0.1 kilometers (0.1 miles); or
during the NIGHT for: 0.5 kilometers (0.3 miles).

LARGE SPILLS

First isolate in all directions: 180 meters (600 feet).
Note wind direction.
Then protect persons downwind:

during the DAY for: 1.8 kilometers (1.1 miles); or
during the NIGHT for: 5.7 kilometers (3.6 miles).

DOT ID No. 1788 : Hydrobromic acid

Editor's Note: This material is not listed in the Table of Initial Isolation and Protective Action Distances

DOT ID No. 1788 : Hydrobromic acid, solution

Editor's Note: This material is not listed in the Table of Initial Isolation and Protective Action Distances

SPILL - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

Increase, in the downwind direction, as necessary, the isolation distance of at least 100 meters (330 feet) in all directions.

SPILL - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

Increase, in the downwind direction, as necessary, the isolation distance of at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids in all directions.

FIRE - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

If tank, rail car or tank truck is involved in a fire, ISOLATE for 1600 meters (1 mile) in all directions; also, consider initial evacuation for 1600 meters (1 mile) in all directions.

FIRE - PUBLIC SAFETY EVACUATION DISTANCES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

PUBLIC SAFETY MEASURES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)

CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number:

MEXICO:

SETIQ:

01-800-00-214-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5559-1588;
For calls originating elsewhere, call: 011-52-555-559-1588.

CENACOM:

01-800-00-413-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5550-1496, 5550-1552, 5550-1485, or 5550-4885;
For calls originating elsewhere, call: 011-52-555-550-1496, or 011-52-555-550-1552; 011-52-555-550-1485, or 011-52-555-550-4885.

ARGENTINA:

CIQUIME:

0-800-222-2933 in the Republic of Argentina;
For calls originating elsewhere, call: +54-11-4613-1100.

BRAZIL:

PRÓ-QUÍMICA:

0-800-118270 (Toll-free in Brazil);
For calls originating elsewhere, call: +55-11-232-1144 (Collect calls are accepted).

COLUMBIA:

CISPROQUIM:

01-800-091-6012 in Colombia;
For calls originating in Bogotá, Colombia, call: 288-6012;
For calls originating elsewhere, call: 011-57-1-288-6012.

CANADA:

CANUTEC:

613-996-6666 (Collect calls are accepted);
*666 cellular (in Canada only).

UNITED STATES:

CHEMTREC®:

1-800-424-9300 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
703-527-3887 for calls originating elsewhere (Collect calls are accepted).

CHEM-TEL, INC.:

1-800-255-3924 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
813-248-0585 for calls originating elsewhere (Collect calls are accepted).

INFOTRAC:

1-800-535-5053 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
352-323-3500 for calls originating elsewhere (Collect calls are accepted).

3E COMPANY:

1-800-451-8346 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
760-602-8703 for calls originating elsewhere (Collect calls are accepted).

NATIONAL RESPONSE CENTER (NRC):

1-800-424-8802 - (24 hours) (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
202-267-2675 for calls in the District of Columbia.

MILITARY SHIPMENTS:

703-697-0218 - Explosives/ammunition incidents (Collect calls are accepted);
1-800-851-8061 - All other dangerous goods incidents.

NATIONWIDE POISON CONTROL CENTER (United States only):

1-800-222-1222 (Toll-free in the U.S.).

For additional details see the section entitled "WHO TO CALL FOR ASSISTANCE" under the ERG Instructions.
As an immediate precautionary measure, isolate spill or leak area for at least 100 meters (330 feet) in all directions.
Keep unauthorized personnel away.
Stay upwind.
Many gases are heavier than air and will spread along ground and collect in low or confined areas (sewers, basements, tanks).
Keep out of low areas.
Ventilate closed spaces before entering.

PUBLIC SAFETY MEASURES - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)

CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number:

MEXICO:

SETIQ:

01-800-00-214-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5559-1588;
For calls originating elsewhere, call: 011-52-555-559-1588.

CENACOM:

01-800-00-413-00 in the Mexican Republic;
For calls originating in Mexico City and the Metropolitan Area: 5550-1496, 5550-1552, 5550-1485, or 5550-4885;
For calls originating elsewhere, call: 011-52-555-550-1496, or 011-52-555-550-1552; 011-52-555-550-1485, or 011-52-555-550-4885.

ARGENTINA:

CIQUIME:

0-800-222-2933 in the Republic of Argentina;
For calls originating elsewhere, call: +54-11-4613-1100.

BRAZIL:

PRÓ-QUÍMICA:

0-800-118270 (Toll-free in Brazil);
For calls originating elsewhere, call: +55-11-232-1144 (Collect calls are accepted).

COLUMBIA:

CISPROQUIM:

01-800-091-6012 in Colombia;
For calls originating in Bogotá, Colombia, call: 288-6012;
For calls originating elsewhere, call: 011-57-1-288-6012.

CANADA:

CANUTEC:

613-996-6666 (Collect calls are accepted);
*666 cellular (in Canada only).

UNITED STATES:

CHEMTREC®:

1-800-424-9300 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
703-527-3887 for calls originating elsewhere (Collect calls are accepted).

CHEM-TEL, INC.:

1-800-255-3924 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
813-248-0585 for calls originating elsewhere (Collect calls are accepted).

INFOTRAC:

1-800-535-5053 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
352-323-3500 for calls originating elsewhere (Collect calls are accepted).

3E COMPANY:

1-800-451-8346 (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
760-602-8703 for calls originating elsewhere (Collect calls are accepted).

NATIONAL RESPONSE CENTER (NRC):

1-800-424-8802 - (24 hours) (Toll-free in the U.S., Canada, and the U.S. Virgin Islands);
202-267-2675 for calls in the District of Columbia.

MILITARY SHIPMENTS:

703-697-0218 - Explosives/ammunition incidents (Collect calls are accepted);
1-800-851-8061 - All other dangerous goods incidents.

NATIONWIDE POISON CONTROL CENTER (United States only):

1-800-222-1222 (Toll-free in the U.S.).

For additional details see the section entitled "WHO TO CALL FOR ASSISTANCE" under the ERG Instructions.
As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.
Keep unauthorized personnel away.
Stay upwind.
Keep out of low areas.
Ventilate enclosed areas.

AIHA ERPG Values for CAS10035-10-6 (AIHA, 2006):

Not Listed

DOE TEEL Values for CAS10035-10-6 (U.S. Department of Energy, Office of Emergency Management, 2010):

Listed as Hydrobromic acid (Hydrogen bromide)
TEEL-0 (units = ppm): 1
TEEL-1 (units = ppm): 1
TEEL-2 (units = ppm): 22
TEEL-3 (units = ppm): 120
Definitions:

TEEL-0: The threshold concentration below which most people will experience no adverse health effects.
TEEL-1: The airborne concentration (expressed as ppm [parts per million] or mg/m(3) [milligrams per cubic meter]) of a substance above which it is predicted that the general population, including susceptible individuals, could experience notable discomfort, irritation, or certain asymptomatic, nonsensory effects. However, these effects are not disabling and are transient and reversible upon cessation of exposure.
TEEL-2: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience irreversible or other serious, long-lasting, adverse health effects or an impaired ability to escape.
TEEL-3: The airborne concentration (expressed as ppm or mg/m(3)) of a substance above which it is predicted that the general population, including susceptible individuals, could experience life-threatening adverse health effects or death.

AEGL Values for CAS10035-10-6 (National Research Council, 2010; National Research Council, 2009; National Research Council, 2008; National Research Council, 2007; NRC, 2001; NRC, 2002; NRC, 2003; NRC, 2004; NRC, 2004; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; United States Environmental Protection Agency Office of Pollution Prevention and Toxics, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2009; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2008; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2007; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2005; National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances, 2006; 62 FR 58840, 1997; 65 FR 14186, 2000; 65 FR 39264, 2000; 65 FR 77866, 2000; 66 FR 21940, 2001; 67 FR 7164, 2002; 68 FR 42710, 2003; 69 FR 54144, 2004):

Not Listed

NIOSH IDLH Values for CAS10035-10-6 (National Institute for Occupational Safety and Health, 2007):

IDLH: 30 ppm
Note(s): Not Listed

CONTAINMENT/WASTE TREATMENT OPTIONS

SUMMARY

SPILL OR LEAK PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)
- Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire.
- Do not touch or walk through spilled material.
- Stop leak if you can do it without risk.
- If possible, turn leaking containers so that gas escapes rather than liquid.
- Prevent entry into waterways, sewers, basements or confined areas.
- Do not direct water at spill or source of leak.
- Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to conact spilled material.
- Isolate area until gas has dispersed.
SPILL OR LEAK PRECAUTIONS - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)
- ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
- Do not touch damaged containers or spilled material unless wearing appropriate protective clothing.
- Stop leak if you can do it without risk.
- Prevent entry into waterways, sewers, basements or confined areas.
- Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
- DO NOT GET WATER INSIDE CONTAINERS.
RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 125 (ERG, 2004)
- Wear positive pressure self-contained breathing apparatus (SCBA).
- Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection.
- Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.
RECOMMENDED PROTECTIVE CLOTHING - EMERGENCY RESPONSE GUIDEBOOK, GUIDE 154 (ERG, 2004)
- Wear positive pressure self-contained breathing apparatus (SCBA).
- Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection.
- Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.
Attempts should be made to stop or control leaks if it can be done safely. Water spray should be used to knock down vapors, and dikes should be constructed to contain spilled material. Prevent spills of hydrogen bromide or hydrobromic acid from reaching sewers and water sources, and neutralize the spill with crushed limestone, soda ash, or lime. Water should not be used on anhydrous hydrogen bromide itself (NFPA, 1994) AAR, 1994).
For leaks of gaseous hydrogen bromide, the area of the leak should be ventilated. If possible, the source of the leak should be stopped. If not, the leaking cylinder should be taken to a safe area in open air and repaired or allowed to empty. Solutions should be allowed to vaporize and then the vapors dispersed (HSDB , 1995).

WASTE TREATMENT OPTIONS

CHEMICAL TREATMENT

Hydrogen bromide should be neutralized by mixing with large quantities of water and powdered limestone, soda ash, slaked lime, or sodium bicarbonate. The solution may then be discharged with large quantities of water into a sink lined with protective matting and filled with chipped marble (ITI, 1988; CHRIS , 1995).
Environmental regulatory agencies should be consulted for guidance prior to land disposal of waste residue or sludge (HSDB , 1995).
Waste management activities associated with material disposition are unique to individual situations. Proper waste characterization and decisions regarding waste management should be coordinated with the appropriate local, state, or federal authorities to ensure compliance with all applicable rules and regulations.

-ENVIRONMENTAL HAZARD MANAGEMENT

POLLUTION HAZARD

In addition to potential sources of pollution caused by the manufacture, use, and transportation of hydrogen bromide, it is also found as a natural constituent of volcano gas (HSDB , 1995).

ENVIRONMENTAL FATE AND KINETICS

OTHER

OTHER
- No information found at the time of this review.

ENVIRONMENTAL TOXICITY

Hydrogen bromide is harmful to aquatic life in high concentrations, and may be dangerous if allowed to enter water sources (CHRIS , 1995).

-PHYSICAL/CHEMICAL PROPERTIES

MOLECULAR WEIGHT

80.92

DESCRIPTION/PHYSICAL STATE

Hydrogen bromide is a colorless, corrosive gas with an acrid odor (ACGIH, 1991).

Hydrobromic acid is a colorless to faintly yellow solution of hydrogen bromide in water, and is marketed in various concentrations (Budavari, 1989).

Hydrobromic acid darkens gradually when exposed to light and air (Budavari, 1989).

Aqueous solutions of hydrobromic acid are highly acidic (Budavari, 1989).

VAPOR PRESSURE

HYDROGEN BROMIDE

> 760 mmHg (at 20 degrees C) (ACGIH, 1991)
20 atm (NIOSH, 1995)

DENSITY

TEMPERATURE AND/OR PRESSURE NOT LISTED

Hydrobromic Acid, 50% HBr: 1.517 g/L (Budavari, 1989)
Hydrobromic Acid, 40% HBr: 1.38 g/L (Budavari, 1989)
Hydrobromic Acid, 34% HBr: 1.31 g/L (Budavari, 1989)
Hydrobromic Acid, 10% HBr: 1.08 g/L (Budavari, 1989)

FREEZING/MELTING POINT

FREEZING POINT

-86 degrees C (Lewis, 1993)

BOILING POINT

HYDROGEN BROMIDE (Budavari, 1989)

-66.8 degrees C (at 760 mmHg)
-4.8 degrees C (at 11.0 atm)
12 degrees C (at 17.1 atm)
36 degrees C (at 30.0 atm)
70 degrees C (at 59.2 atm)

HYDROBROMIC ACID (Budavari, 1989)

74.12 degrees C (at 100 mmHg) (49.80% HBr)
107.00 degrees C (at 400 mmHg) (48.47% HBr)
122 degrees C (at 700 mmHg) (47.74% HBr)
125.79 degrees C (at 800 mmHg) (47.56% HBr)

FLASH POINT

Not Applicable (NIOSH, 1995)

AUTOIGNITION TEMPERATURE

Not Applicable (CHRIS , 1995)

EXPLOSIVE LIMITS

LOWER

Not Applicable (NIOSH, 1995)

UPPER

Not Applicable (NIOSH, 1995)

SOLUBILITY

IN WATER

Hydrogen bromide is freely soluble in water; at 0 degrees C, one volume of water dissolves 600 volumes of gaseous hydrogen bromide (Budavari, 1989).

The solubility of hydrogen bromide in water is 221 g/100 cm(3) water (at 0 degrees C) and 130 g/100 cm(3) water (at 100 degrees C) (HSDB , 1995).
The solubility in water is 49% by weight (NIOSH, 1995).
A saturated aqueous solution contains 68.85% hydrogen bromide (at 0 degrees C) and 66% hydrogen bromide (at 25 degrees C) (Budavari, 1989).

IN ORGANIC SOLVENTS

Hydrogen bromide is soluble in alcohol and organic solvents (Budavari, 1989).

OTHER/PHYSICAL

CRITICAL PRESSURE

84.5 atm (Budavari, 1989)

CRITICAL TEMPERATURE

89.8 degrees C (Budavari, 1989)

INDEX OF REFRACTION

1.325 (HSDB , 1995)

-REFERENCES

GENERAL BIBLIOGRAPHY

40 CFR 372.28: Environmental Protection Agency - Toxic Chemical Release Reporting, Community Right-To-Know, Lower thresholds for chemicals of special concern. National Archives and Records Administration (NARA) and the Government Printing Office (GPO). Washington, DC. Final rules current as of Apr 3, 2006.

40 CFR 372.65: Environmental Protection Agency - Toxic Chemical Release Reporting, Community Right-To-Know, Chemicals and Chemical Categories to which this part applies. National Archives and Records Association (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Apr 3, 2006.

49 CFR 172.101 - App. B: Department of Transportation - Table of Hazardous Materials, Appendix B: List of Marine Pollutants. National Archives and Records Administration (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Aug 29, 2005.

49 CFR 172.101: Department of Transportation - Table of Hazardous Materials. National Archives and Records Administration (NARA) and the Government Printing Office (GPO), Washington, DC. Final rules current as of Aug 11, 2005.

62 FR 58840: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 1997.

65 FR 14186: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

65 FR 39264: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

65 FR 77866: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2000.

66 FR 21940: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2001.

67 FR 7164: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2002.

68 FR 42710: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2003.

69 FR 54144: Notice of the National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances - Proposed AEGL Values, Environmental Protection Agency, NAC/AEGL Committee. National Archives and Records Administration (NARA) and the Government Publishing Office (GPO), Washington, DC, 2004.

ACGIH: Documentation of the Threshold Limit Values and Biological Exposure Indices, 6th ed, Am Conference of Govt Ind Hyg, Inc, Cincinnati, OH, 1991.

AIHA: 2006 Emergency Response Planning Guidelines and Workplace Environmental Exposure Level Guides Handbook, American Industrial Hygiene Association, Fairfax, VA, 2006.

American Conference of Governmental Industrial Hygienists : ACGIH 2010 Threshold Limit Values (TLVs(R)) for Chemical Substances and Physical Agents and Biological Exposure Indices (BEIs(R)), American Conference of Governmental Industrial Hygienists, Cincinnati, OH, 2010.

Ansell-Edmont: SpecWare Chemical Application and Recommendation Guide. Ansell-Edmont. Coshocton, OH. 2001. Available from URL: http://www.ansellpro.com/specware. As accessed 10/31/2001.

Bata Shoe Company: Industrial Footwear Catalog, Bata Shoe Company, Belcamp, MD, 1995.

Best Manufacturing: ChemRest Chemical Resistance Guide. Best Manufacturing. Menlo, GA. 2002. Available from URL: http://www.chemrest.com. As accessed 10/8/2002.

Best Manufacturing: Degradation and Permeation Data. Best Manufacturing. Menlo, GA. 2004. Available from URL: http://www.chemrest.com/DomesticPrep2/. As accessed 04/09/2004.

Boss Manufacturing Company: Work Gloves, Boss Manufacturing Company, Kewanee, IL, 1998.

Bretherick L: Bretherick's Handbook of Reactive Chemical Hazards, 4th ed, Butterworths, London, England, 1990.

Budavari S: The Merck Index, 11th ed, Merck & Co, Inc, Rahway, NJ, 1989.

Burgess JL, Kirk M, Borron SW, et al: Emergency department hazardous materials protocol for contaminated patients. Ann Emerg Med 1999; 34(2):205-212.

CHRIS : CHRIS Hazardous Chemical Data. US Department of Transportation, US Coast Guard. Washington, DC (Internet Version). Edition expires 10/31/1995; provided by Truven Health Analytics Inc., Greenwood Village, CO.

ChemFab Corporation: Chemical Permeation Guide Challenge Protective Clothing Fabrics, ChemFab Corporation, Merrimack, NH, 1993.

Comasec Safety, Inc.: Chemical Resistance to Permeation Chart. Comasec Safety, Inc.. Enfield, CT. 2003. Available from URL: http://www.comasec.com/webcomasec/english/catalogue/mtabgb.html. As accessed 4/28/2003.

Comasec Safety, Inc.: Product Literature, Comasec Safety, Inc., Enfield, CT, 2003a.

DFG: List of MAK and BAT Values 2002, Report No. 38, Deutsche Forschungsgemeinschaft, Commission for the Investigation of Health Hazards of Chemical Compounds in the Work Area, Wiley-VCH, Weinheim, Federal Republic of Germany, 2002.

DuPont: DuPont Suit Smart: Interactive Tool for the Selection of Protective Apparel. DuPont. Wilmington, DE. 2002. Available from URL: http://personalprotection.dupont.com/protectiveapparel/suitsmart/smartsuit2/na_english.asp. As accessed 10/31/2002.

DuPont: Permeation Guide for DuPont Tychem Protective Fabrics. DuPont. Wilmington, DE. 2003. Available from URL: http://personalprotection.dupont.com/en/pdf/tyvektychem/pgcomplete20030128.pdf. As accessed 4/26/2004.

DuPont: Permeation Test Results. DuPont. Wilmington, DE. 2002a. Available from URL: http://www.tyvekprotectiveapprl.com/databases/default.htm. As accessed 7/31/2002.

EPA: Search results for Toxic Substances Control Act (TSCA) Inventory Chemicals. US Environmental Protection Agency, Substance Registry System, U.S. EPA's Office of Pollution Prevention and Toxics. Washington, DC. 2005. Available from URL: http://www.epa.gov/srs/.

ERG: Emergency Response Guidebook. A Guidebook for First Responders During the Initial Phase of a Dangerous Goods/Hazardous Materials Incident, U.S. Department of Transportation, Research and Special Programs Administration, Washington, DC, 2004.

Guardian Manufacturing Group: Guardian Gloves Test Results. Guardian Manufacturing Group. Willard, OH. 2001. Available from URL: http://www.guardian-mfg.com/guardianmfg.html. As accessed 12/11/2001.

HSDB : Hazardous Substances Data Bank. National Library of Medicine. Bethesda, MD (Internet Version). Edition expires 10/31/1995; provided by Truven Health Analytics Inc., Greenwood Village, CO.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: 1,3-Butadiene, Ethylene Oxide and Vinyl Halides (Vinyl Fluoride, Vinyl Chloride and Vinyl Bromide), 97, International Agency for Research on Cancer, Lyon, France, 2008.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Formaldehyde, 2-Butoxyethanol and 1-tert-Butoxypropan-2-ol, 88, International Agency for Research on Cancer, Lyon, France, 2006.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Household Use of Solid Fuels and High-temperature Frying, 95, International Agency for Research on Cancer, Lyon, France, 2010a.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Smokeless Tobacco and Some Tobacco-specific N-Nitrosamines, 89, International Agency for Research on Cancer, Lyon, France, 2007.

IARC Working Group on the Evaluation of Carcinogenic Risks to Humans : IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Some Non-heterocyclic Polycyclic Aromatic Hydrocarbons and Some Related Exposures, 92, International Agency for Research on Cancer, Lyon, France, 2010.

IARC: List of all agents, mixtures and exposures evaluated to date - IARC Monographs: Overall Evaluations of Carcinogenicity to Humans, Volumes 1-88, 1972-PRESENT. World Health Organization, International Agency for Research on Cancer. Lyon, FranceAvailable from URL: http://monographs.iarc.fr/monoeval/crthall.html. As accessed Oct 07, 2004.

ICAO: Technical Instructions for the Safe Transport of Dangerous Goods by Air, 2003-2004. International Civil Aviation Organization, Montreal, Quebec, Canada, 2002.

ILC Dover, Inc.: Ready 1 The Chemturion Limited Use Chemical Protective Suit, ILC Dover, Inc., Frederica, DE, 1998.

ITI: Toxic and Hazardous Industrial Chemicals Safety Manual, The International Technical Information Institute, Tokyo, Japan, 1988.

International Agency for Research on Cancer (IARC): IARC monographs on the evaluation of carcinogenic risks to humans: list of classifications, volumes 1-116. International Agency for Research on Cancer (IARC). Lyon, France. 2016. Available from URL: http://monographs.iarc.fr/ENG/Classification/latest_classif.php. As accessed 2016-08-24.

International Agency for Research on Cancer: IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. World Health Organization. Geneva, Switzerland. 2015. Available from URL: http://monographs.iarc.fr/ENG/Classification/. As accessed 2015-08-06.

Kappler, Inc.: Suit Smart. Kappler, Inc.. Guntersville, AL. 2001. Available from URL: http://www.kappler.com/suitsmart/smartsuit2/na_english.asp?select=1. As accessed 7/10/2001.

Kimberly-Clark, Inc.: Chemical Test Results. Kimberly-Clark, Inc.. Atlanta, GA. 2002. Available from URL: http://www.kc-safety.com/tech_cres.html. As accessed 10/4/2002.

LaCrosse-Rainfair: Safety Products, LaCrosse-Rainfair, Racine, WI, 1997.

Lewis RJ: Hawley's Condensed Chemical Dictionary, 12th ed, Van Nostrand Reinhold Company, New York, NY, 1993.

Lewis RJ: Sax's Dangerous Properties of Industrial Materials, 8th ed, Van Nostrand Reinhold Company, New York, NY, 1992.

MAPA Professional: Chemical Resistance Guide. MAPA North America. Columbia, TN. 2003. Available from URL: http://www.mapaglove.com/pro/ChemicalSearch.asp. As accessed 4/21/2003.

MAPA Professional: Chemical Resistance Guide. MAPA North America. Columbia, TN. 2004. Available from URL: http://www.mapaglove.com/ProductSearch.cfm?id=1. As accessed 6/10/2004.

Mar-Mac Manufacturing, Inc: Product Literature, Protective Apparel, Mar-Mac Manufacturing, Inc., McBee, SC, 1995.

Marigold Industrial: US Chemical Resistance Chart, on-line version. Marigold Industrial. Norcross, GA. 2003. Available from URL: www.marigoldindustrial.com/charts/uschart/uschart.html. As accessed 4/14/2003.

Memphis Glove Company: Permeation Guide. Memphis Glove Company. Memphis, TN. 2001. Available from URL: http://www.memphisglove.com/permeation.html. As accessed 7/2/2001.

Montgomery Safety Products: Montgomery Safety Products Chemical Resistant Glove Guide, Montgomery Safety Products, Canton, OH, 1995.

NFPA: Fire Protection Guide to Hazardous Materials, 11th ed, National Fire Protection Association, Quincy, MA, 1994.

NFPA: Fire Protection Guide to Hazardous Materials, 13th ed., National Fire Protection Association, Quincy, MA, 2002.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 1, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2001.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 2, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2002.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 3, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2003.

NRC: Acute Exposure Guideline Levels for Selected Airborne Chemicals - Volume 4, Subcommittee on Acute Exposure Guideline Levels, Committee on Toxicology, Board on Environmental Studies and Toxicology, Commission of Life Sciences, National Research Council. National Academy Press, Washington, DC, 2004.

Nat-Wear: Protective Clothing, Hazards Chart. Nat-Wear. Miora, NY. 2001. Available from URL: http://www.natwear.com/hazchart1.htm. As accessed 7/12/2001.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2,3-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2,4-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2-Butylene Oxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648083cdbb&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,2-Dibromoethane (Proposed). United States Environmental Protection Agency. Washington, DC. 2007g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064802796db&disposition=attachment&contentType=pdf. As accessed 2010-08-18.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 1,3,5-Trimethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d68a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for 2-Ethylhexyl Chloroformate (Proposed). United States Environmental Protection Agency. Washington, DC. 2007b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648037904e&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Acrylonitrile (Proposed). United States Environmental Protection Agency. Washington, DC. 2007c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648028e6a3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Adamsite (Proposed). United States Environmental Protection Agency. Washington, DC. 2007h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Agent BZ (3-quinuclidinyl benzilate) (Proposed). United States Environmental Protection Agency. Washington, DC. 2007f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ad507&disposition=attachment&contentType=pdf. As accessed 2010-08-18.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Allyl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648039d9ee&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Aluminum Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Arsenic Trioxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2007m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480220305&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Automotive Gasoline Unleaded (Proposed). United States Environmental Protection Agency. Washington, DC. 2009a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cc17&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Biphenyl (Proposed). United States Environmental Protection Agency. Washington, DC. 2005j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064801ea1b7&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bis-Chloromethyl Ether (BCME) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006n. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648022db11&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Boron Tribromide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ae1d3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bromine Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2007d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648039732a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Bromoacetone (Proposed). United States Environmental Protection Agency. Washington, DC. 2008e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809187bf&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Calcium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Carbonyl Fluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803ae328&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Carbonyl Sulfide (Proposed). United States Environmental Protection Agency. Washington, DC. 2007e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648037ff26&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Chlorobenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2008c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064803a52bb&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Cyanogen (Proposed). United States Environmental Protection Agency. Washington, DC. 2008f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809187fe&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Dimethyl Phosphite (Proposed). United States Environmental Protection Agency. Washington, DC. 2009. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbf3&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Diphenylchloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648091884e&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyl Phosphorodichloridate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480920347&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethylbenzene (Proposed). United States Environmental Protection Agency. Washington, DC. 2008g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809203e7&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ethyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Germane (Proposed). United States Environmental Protection Agency. Washington, DC. 2008j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963906&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Hexafluoropropylene (Proposed). United States Environmental Protection Agency. Washington, DC. 2006. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064801ea1f5&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Ketene (Proposed). United States Environmental Protection Agency. Washington, DC. 2007. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ee7c&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Magnesium Aluminum Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Magnesium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Malathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2009k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064809639df&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Mercury Vapor (Proposed). United States Environmental Protection Agency. Washington, DC. 2009b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a8a087&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl Isothiocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963a03&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl Parathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2008l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963a57&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyl tertiary-butyl ether (Proposed). United States Environmental Protection Agency. Washington, DC. 2007a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064802a4985&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methylchlorosilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2005. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5f4&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Methyldichlorosilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2005a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c646&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN1 CAS Reg. No. 538-07-8) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006a. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN2 CAS Reg. No. 51-75-2) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006b. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Mustard (HN3 CAS Reg. No. 555-77-1) (Proposed). United States Environmental Protection Agency. Washington, DC. 2006c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6cb&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Tetroxide (Proposed). United States Environmental Protection Agency. Washington, DC. 2008n. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648091855b&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Nitrogen Trifluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009l. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963e0c&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Parathion (Proposed). United States Environmental Protection Agency. Washington, DC. 2008o. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480963e32&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Perchloryl Fluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e268&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Perfluoroisobutylene (Proposed). United States Environmental Protection Agency. Washington, DC. 2009d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e26a&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008p. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096dd58&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyl Mercaptan (Proposed). United States Environmental Protection Agency. Washington, DC. 2006d. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020cc0c&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phenyldichloroarsine (Proposed). United States Environmental Protection Agency. Washington, DC. 2007k. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020fd29&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phorate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008q. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096dcc8&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phosgene (Draft-Revised). United States Environmental Protection Agency. Washington, DC. 2009e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a8a08a&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Phosgene Oxime (Proposed). United States Environmental Protection Agency. Washington, DC. 2009f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e26d&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Potassium Cyanide (Proposed). United States Environmental Protection Agency. Washington, DC. 2009g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbb9&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Potassium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005c. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Propargyl Alcohol (Proposed). United States Environmental Protection Agency. Washington, DC. 2006e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec91&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Selenium Hexafluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2006f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec55&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Silane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006g. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d523&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sodium Cyanide (Proposed). United States Environmental Protection Agency. Washington, DC. 2009h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7cbb9&disposition=attachment&contentType=pdf. As accessed 2010-08-15.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sodium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Strontium Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005f. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Sulfuryl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2006h. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020ec7a&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tear Gas (Proposed). United States Environmental Protection Agency. Washington, DC. 2008s. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e551&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tellurium Hexafluoride (Proposed). United States Environmental Protection Agency. Washington, DC. 2009i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7e2a1&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tert-Octyl Mercaptan (Proposed). United States Environmental Protection Agency. Washington, DC. 2008r. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e5c7&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Tetramethoxysilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d632&disposition=attachment&contentType=pdf. As accessed 2010-08-17.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethoxysilane (Proposed). United States Environmental Protection Agency. Washington, DC. 2006i. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d632&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethyl Phosphite (Proposed). United States Environmental Protection Agency. Washington, DC. 2009j. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=0900006480a7d608&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Trimethylacetyl Chloride (Proposed). United States Environmental Protection Agency. Washington, DC. 2008t. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648096e5cc&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for Zinc Phosphide (Proposed). United States Environmental Protection Agency. Washington, DC. 2005e. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020c5ed&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances: Acute Exposure Guideline Levels (AEGLs) for n-Butyl Isocyanate (Proposed). United States Environmental Protection Agency. Washington, DC. 2008m. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=09000064808f9591&disposition=attachment&contentType=pdf. As accessed 2010-08-12.

National Institute for Occupational Safety and Health: NIOSH Pocket Guide to Chemical Hazards, U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, Cincinnati, OH, 2007.

National Research Council : Acute exposure guideline levels for selected airborne chemicals, 5, National Academies Press, Washington, DC, 2007.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 6, National Academies Press, Washington, DC, 2008.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 7, National Academies Press, Washington, DC, 2009.

National Research Council: Acute exposure guideline levels for selected airborne chemicals, 8, National Academies Press, Washington, DC, 2010.

Neese Industries, Inc.: Fabric Properties Rating Chart. Neese Industries, Inc.. Gonzales, LA. 2003. Available from URL: http://www.neeseind.com/new/TechGroup.asp?Group=Fabric+Properties&Family=Technical. As accessed 4/15/2003.

North: Chemical Resistance Comparison Chart - Protective Footwear . North Safety. Cranston, RI. 2002. Available from URL: http://www.linkpath.com/index2gisufrm.php?t=N-USA1. As accessed April 30, 2004.

North: eZ Guide Interactive Software. North Safety. Cranston, RI. 2002a. Available from URL: http://www.northsafety.com/feature1.htm. As accessed 8/31/2002.

Playtex: Fits Tough Jobs Like a Glove, Playtex, Westport, CT, 1995.

RTECS : Registry of Toxic Effects of Chemical Substances. National Institute for Occupational Safety and Health. Cincinnati, OH (Internet Version). Edition expires October/31/1995; provided by Truven Health Analytics Inc., Greenwood Village, CO.

River City: Protective Wear Product Literature, River City, Memphis, TN, 1995.

Safety 4: North Safety Products: Chemical Protection Guide. North Safety. Cranston, RI. 2002. Available from URL: http://www.safety4.com/guide/set_guide.htm. As accessed 8/14/2002.

Servus: Norcross Safety Products, Servus Rubber, Servus, Rock Island, IL, 1995.

Standard Safety Equipment: Product Literature, Standard Safety Equipment, McHenry, IL, 1995.

Tingley: Chemical Degradation for Footwear and Clothing. Tingley. South Plainfield, NJ. 2002. Available from URL: http://www.tingleyrubber.com/tingley/Guide_ChemDeg.pdf. As accessed 10/16/2002.

Trelleborg-Viking, Inc.: Chemical and Biological Tests (database). Trelleborg-Viking, Inc.. Portsmouth, NH. 2002. Available from URL: http://www.trelleborg.com/protective/. As accessed 10/18/2002.

Trelleborg-Viking, Inc.: Trellchem Chemical Protective Suits, Interactive manual & Chemical Database. Trelleborg-Viking, Inc.. Portsmouth, NH. 2001.

U.S. Department of Energy, Office of Emergency Management: Protective Action Criteria (PAC) with AEGLs, ERPGs, & TEELs: Rev. 26 for chemicals of concern. U.S. Department of Energy, Office of Emergency Management. Washington, DC. 2010. Available from URL: http://www.hss.doe.gov/HealthSafety/WSHP/Chem_Safety/teel.html. As accessed 2011-06-27.

U.S. Department of Health and Human Services, Public Health Service, National Toxicology Project : 11th Report on Carcinogens. U.S. Department of Health and Human Services, Public Health Service, National Toxicology Program. Washington, DC. 2005. Available from URL: http://ntp.niehs.nih.gov/INDEXA5E1.HTM?objectid=32BA9724-F1F6-975E-7FCE50709CB4C932. As accessed 2011-06-27.

U.S. Environmental Protection Agency: Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof. Environmental Protection Agency's (EPA) Resource Conservation and Recovery Act (RCRA); List of hazardous substances and reportable quantities 2010b; 40CFR(261.33, e-f):77-.

U.S. Environmental Protection Agency: Integrated Risk Information System (IRIS). U.S. Environmental Protection Agency. Washington, DC. 2011. Available from URL: http://cfpub.epa.gov/ncea/iris/index.cfm?fuseaction=iris.showSubstanceList&list_type=date. As accessed 2011-06-21.

U.S. Environmental Protection Agency: List of Radionuclides. U.S. Environmental Protection Agency. Washington, DC. 2010a. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-sec302-4.pdf. As accessed 2011-06-17.

U.S. Environmental Protection Agency: List of hazardous substances and reportable quantities. U.S. Environmental Protection Agency. Washington, DC. 2010. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-sec302-4.pdf. As accessed 2011-06-17.

U.S. Environmental Protection Agency: The list of extremely hazardous substances and their threshold planning quantities (CAS Number Order). U.S. Environmental Protection Agency. Washington, DC. 2010c. Available from URL: http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol27/pdf/CFR-2010-title40-vol27-part355.pdf. As accessed 2011-06-17.

U.S. Occupational Safety and Health Administration: Part 1910 - Occupational safety and health standards (continued) Occupational Safety, and Health Administration's (OSHA) list of highly hazardous chemicals, toxics and reactives. Subpart Z - toxic and hazardous substances. CFR 2010 2010; Vol6(SEC1910):7-.

U.S. Occupational Safety, and Health Administration (OSHA): Process safety management of highly hazardous chemicals. 29 CFR 2010 2010; 29(1910.119):348-.

United States Environmental Protection Agency Office of Pollution Prevention and Toxics: Acute Exposure Guideline Levels (AEGLs) for Vinyl Acetate (Proposed). United States Environmental Protection Agency. Washington, DC. 2006. Available from URL: http://www.regulations.gov/search/Regs/contentStreamer?objectId=090000648020d6af&disposition=attachment&contentType=pdf. As accessed 2010-08-16.

Wells Lamont Industrial: Chemical Resistant Glove Application Chart. Wells Lamont Industrial. Morton Grove, IL. 2002. Available from URL: http://www.wellslamontindustry.com. As accessed 10/31/2002.

Workrite: Chemical Splash Protection Garments, Technical Data and Application Guide, W.L. Gore Material Chemical Resistance Guide, Workrite, Oxnard, CA, 1997.

FeedBack

HYDROGEN BROMIDE

Classification | Information to evaluate chemical incidents

Information to evaluate chemical incidents

Information to evaluate chemical incidents

Information to evaluate chemical incidents